Autodesk Inventor
Reply
Topic Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic to the Top
- Bookmark
- Subscribe
- Printer Friendly Page
*Singlehurst, Rob
M12 ISO 7413 Hex Nut?? - Library
Options
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
135 Views, 6 Replies
11-19-2002 07:36 PM
Can someone try inserting one of these from the library and see if it has a
1.2 mm hole instead of a 12mm hole!!!
How poor is that????
Cheers,
--Rob Singlehurst
1.2 mm hole instead of a 12mm hole!!!
How poor is that????
Cheers,
--Rob Singlehurst
*JGH
Re: M12 ISO 7413 Hex Nut?? - Library
Options
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
11-19-2002 07:42 PM in reply to:
*Singlehurst, Rob
Do you have sp1 ? Cause I had this problem prior to sp1, but it is fine
now....hmm did`nt you get threads visible in nuts as well, pre sp1 or do I
remember wrong ???
If you have sp1, maybe you allready have used this particualar nut, and
therefor it opens the pre sp1 one...maybe ? not even shure if it works that
way.
Jørgen
"Rob Singlehurst" wrote in message
news:AF47054FB714CE23A6C2572D6775475C@in.WebX.maYI
> Can someone try inserting one of these from the library and see if it has
a
> 1.2 mm hole instead of a 12mm hole!!!
>
>
> How poor is that????
>
>
> Cheers,
>
> --Rob Singlehurst
>
>
now....hmm did`nt you get threads visible in nuts as well, pre sp1 or do I
remember wrong ???
If you have sp1, maybe you allready have used this particualar nut, and
therefor it opens the pre sp1 one...maybe ? not even shure if it works that
way.
Jørgen
"Rob Singlehurst"
news:AF47054FB714CE23A6C2572D6775475C@in.WebX.maYI
> Can someone try inserting one of these from the library and see if it has
a
> 1.2 mm hole instead of a 12mm hole!!!
>
>
> How poor is that????
>
>
> Cheers,
>
> --Rob Singlehurst
>
>
*Singlehurst, Rob
Re:
Options
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
11-19-2002 07:57 PM in reply to:
*Singlehurst, Rob
Yes, sorry the threads are visible. But SP1 on this morning and hadn't
needed that part before SP1. I haven't got an old 5.3 one in StandardParts.
I had altered threads.xls but have put the original back and it does the
same. I may try rebooting, see if it makes any difference.
Cheers,
--Rob Singlehurst
"JGH" wrote in message
news:B0AD6B1BAC34A4777CE4208BFE2238A2@in.WebX.maYI
> Do you have sp1 ? Cause I had this problem prior to sp1, but it is fine
> now....hmm did`nt you get threads visible in nuts as well, pre sp1 or do
I
> remember wrong ???
>
> If you have sp1, maybe you allready have used this particualar nut, and
> therefor it opens the pre sp1 one...maybe ? not even shure if it works
that
> way.
>
> Jørgen
>
> "Rob Singlehurst" wrote in message
> news:AF47054FB714CE23A6C2572D6775475C@in.WebX.maYI
> > Can someone try inserting one of these from the library and see if it
has
> a
> > 1.2 mm hole instead of a 12mm hole!!!
> >
> >
> > How poor is that????
> >
> >
> > Cheers,
> >
> > --Rob Singlehurst
> >
> >
>
>
needed that part before SP1. I haven't got an old 5.3 one in StandardParts.
I had altered threads.xls but have put the original back and it does the
same. I may try rebooting, see if it makes any difference.
Cheers,
--Rob Singlehurst
"JGH"
news:B0AD6B1BAC34A4777CE4208BFE2238A2@in.WebX.maYI
> Do you have sp1 ? Cause I had this problem prior to sp1, but it is fine
> now....hmm did`nt you get threads visible in nuts as well, pre sp1 or do
I
> remember wrong ???
>
> If you have sp1, maybe you allready have used this particualar nut, and
> therefor it opens the pre sp1 one...maybe ? not even shure if it works
that
> way.
>
> Jørgen
>
> "Rob Singlehurst"
> news:AF47054FB714CE23A6C2572D6775475C@in.WebX.maYI
> > Can someone try inserting one of these from the library and see if it
has
> a
> > 1.2 mm hole instead of a 12mm hole!!!
> >
> >
> > How poor is that????
> >
> >
> > Cheers,
> >
> > --Rob Singlehurst
> >
> >
>
>
*Singlehurst, Rob
Re:
Options
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
11-19-2002 08:21 PM in reply to:
*Singlehurst, Rob
I have since sorted this out by deleting all of the local.ISO.whatever.ipt
files in the workgroup search path. Does anyone know why these are not put
in the StandardParts folder like they used to be. The only way I can work
like I used to is then move the parts into the StandardParts folder and then
open my original assembly and point to the correct folder.
???????????????
Cheers,
--Rob Singlehurst
"Rob Singlehurst" wrote in message
news:1531129D0A51F5428587F00A034F666E@in.WebX.maYI
> Yes, sorry the threads are visible. But SP1 on this morning and hadn't
> needed that part before SP1. I haven't got an old 5.3 one in
StandardParts.
> I had altered threads.xls but have put the original back and it does the
> same. I may try rebooting, see if it makes any difference.
>
> Cheers,
>
> --Rob Singlehurst
>
> "JGH" wrote in message
> news:B0AD6B1BAC34A4777CE4208BFE2238A2@in.WebX.maYI
> > Do you have sp1 ? Cause I had this problem prior to sp1, but it is fine
> > now....hmm did`nt you get threads visible in nuts as well, pre sp1 or
do
> I
> > remember wrong ???
> >
> > If you have sp1, maybe you allready have used this particualar nut, and
> > therefor it opens the pre sp1 one...maybe ? not even shure if it works
> that
> > way.
> >
> > Jørgen
> >
> > "Rob Singlehurst" wrote in message
> > news:AF47054FB714CE23A6C2572D6775475C@in.WebX.maYI
> > > Can someone try inserting one of these from the library and see if it
> has
> > a
> > > 1.2 mm hole instead of a 12mm hole!!!
> > >
> > >
> > > How poor is that????
> > >
> > >
> > > Cheers,
> > >
> > > --Rob Singlehurst
> > >
> > >
> >
> >
>
>
files in the workgroup search path. Does anyone know why these are not put
in the StandardParts folder like they used to be. The only way I can work
like I used to is then move the parts into the StandardParts folder and then
open my original assembly and point to the correct folder.
???????????????
Cheers,
--Rob Singlehurst
"Rob Singlehurst"
news:1531129D0A51F5428587F00A034F666E@in.WebX.maYI
> Yes, sorry the threads are visible. But SP1 on this morning and hadn't
> needed that part before SP1. I haven't got an old 5.3 one in
StandardParts.
> I had altered threads.xls but have put the original back and it does the
> same. I may try rebooting, see if it makes any difference.
>
> Cheers,
>
> --Rob Singlehurst
>
> "JGH"
> news:B0AD6B1BAC34A4777CE4208BFE2238A2@in.WebX.maYI
> > Do you have sp1 ? Cause I had this problem prior to sp1, but it is fine
> > now....hmm did`nt you get threads visible in nuts as well, pre sp1 or
do
> I
> > remember wrong ???
> >
> > If you have sp1, maybe you allready have used this particualar nut, and
> > therefor it opens the pre sp1 one...maybe ? not even shure if it works
> that
> > way.
> >
> > Jørgen
> >
> > "Rob Singlehurst"
> > news:AF47054FB714CE23A6C2572D6775475C@in.WebX.maYI
> > > Can someone try inserting one of these from the library and see if it
> has
> > a
> > > 1.2 mm hole instead of a 12mm hole!!!
> > >
> > >
> > > How poor is that????
> > >
> > >
> > > Cheers,
> > >
> > > --Rob Singlehurst
> > >
> > >
> >
> >
>
>
*Singlehurst, Rob
Re:
Options
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
11-19-2002 08:48 PM in reply to:
*Singlehurst, Rob
Another thing!!
Why didn't they keep the same naming convention for the standard so it's
easy to see which part is which from the file names??
"Rob Singlehurst" wrote in message
news:99691795E3F86345ABB1E482798B41ED@in.WebX.maYI
> I have since sorted this out by deleting all of the local.ISO.whatever.ipt
> files in the workgroup search path. Does anyone know why these are not
put
> in the StandardParts folder like they used to be. The only way I can work
> like I used to is then move the parts into the StandardParts folder and
then
> open my original assembly and point to the correct folder.
>
> ???????????????
>
>
> Cheers,
>
> --Rob Singlehurst
>
>
> "Rob Singlehurst" wrote in message
> news:1531129D0A51F5428587F00A034F666E@in.WebX.maYI
> > Yes, sorry the threads are visible. But SP1 on this morning and hadn't
> > needed that part before SP1. I haven't got an old 5.3 one in
> StandardParts.
> > I had altered threads.xls but have put the original back and it does the
> > same. I may try rebooting, see if it makes any difference.
> >
> > Cheers,
> >
> > --Rob Singlehurst
> >
> > "JGH" wrote in message
> > news:B0AD6B1BAC34A4777CE4208BFE2238A2@in.WebX.maYI
> > > Do you have sp1 ? Cause I had this problem prior to sp1, but it is
fine
> > > now....hmm did`nt you get threads visible in nuts as well, pre sp1 or
> do
> > I
> > > remember wrong ???
> > >
> > > If you have sp1, maybe you allready have used this particualar nut,
and
> > > therefor it opens the pre sp1 one...maybe ? not even shure if it works
> > that
> > > way.
> > >
> > > Jørgen
> > >
> > > "Rob Singlehurst" wrote in message
> > > news:AF47054FB714CE23A6C2572D6775475C@in.WebX.maYI
> > > > Can someone try inserting one of these from the library and see if
it
> > has
> > > a
> > > > 1.2 mm hole instead of a 12mm hole!!!
> > > >
> > > >
> > > > How poor is that????
> > > >
> > > >
> > > > Cheers,
> > > >
> > > > --Rob Singlehurst
> > > >
> > > >
> > >
> > >
> >
> >
>
>
Why didn't they keep the same naming convention for the standard so it's
easy to see which part is which from the file names??
"Rob Singlehurst"
news:99691795E3F86345ABB1E482798B41ED@in.WebX.maYI
> I have since sorted this out by deleting all of the local.ISO.whatever.ipt
> files in the workgroup search path. Does anyone know why these are not
put
> in the StandardParts folder like they used to be. The only way I can work
> like I used to is then move the parts into the StandardParts folder and
then
> open my original assembly and point to the correct folder.
>
> ???????????????
>
>
> Cheers,
>
> --Rob Singlehurst
>
>
> "Rob Singlehurst"
> news:1531129D0A51F5428587F00A034F666E@in.WebX.maYI
> > Yes, sorry the threads are visible. But SP1 on this morning and hadn't
> > needed that part before SP1. I haven't got an old 5.3 one in
> StandardParts.
> > I had altered threads.xls but have put the original back and it does the
> > same. I may try rebooting, see if it makes any difference.
> >
> > Cheers,
> >
> > --Rob Singlehurst
> >
> > "JGH"
> > news:B0AD6B1BAC34A4777CE4208BFE2238A2@in.WebX.maYI
> > > Do you have sp1 ? Cause I had this problem prior to sp1, but it is
fine
> > > now....hmm did`nt you get threads visible in nuts as well, pre sp1 or
> do
> > I
> > > remember wrong ???
> > >
> > > If you have sp1, maybe you allready have used this particualar nut,
and
> > > therefor it opens the pre sp1 one...maybe ? not even shure if it works
> > that
> > > way.
> > >
> > > Jørgen
> > >
> > > "Rob Singlehurst"
> > > news:AF47054FB714CE23A6C2572D6775475C@in.WebX.maYI
> > > > Can someone try inserting one of these from the library and see if
it
> > has
> > > a
> > > > 1.2 mm hole instead of a 12mm hole!!!
> > > >
> > > >
> > > > How poor is that????
> > > >
> > > >
> > > > Cheers,
> > > >
> > > > --Rob Singlehurst
> > > >
> > > >
> > >
> > >
> >
> >
>
>
*JGH
Re:
Options
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
11-19-2002 08:50 PM in reply to:
*Singlehurst, Rob
Not sure, but try this, In the library browser choose Conigure, dbl click
server name/edit- Choose storage Location and try one of the other options
(not parent assembly)...maybe ? I guess if you have added a library
searchpath you might get that listet or something ?
Jørgen
"Rob Singlehurst" wrote in message
news:99691795E3F86345ABB1E482798B41ED@in.WebX.maYI
> I have since sorted this out by deleting all of the local.ISO.whatever.ipt
> files in the workgroup search path. Does anyone know why these are not
put
> in the StandardParts folder like they used to be. The only way I can work
> like I used to is then move the parts into the StandardParts folder and
then
> open my original assembly and point to the correct folder.
>
> ???????????????
>
>
> Cheers,
>
> --Rob Singlehurst
>
>
> "Rob Singlehurst" wrote in message
> news:1531129D0A51F5428587F00A034F666E@in.WebX.maYI
> > Yes, sorry the threads are visible. But SP1 on this morning and hadn't
> > needed that part before SP1. I haven't got an old 5.3 one in
> StandardParts.
> > I had altered threads.xls but have put the original back and it does the
> > same. I may try rebooting, see if it makes any difference.
> >
> > Cheers,
> >
> > --Rob Singlehurst
> >
> > "JGH" wrote in message
> > news:B0AD6B1BAC34A4777CE4208BFE2238A2@in.WebX.maYI
> > > Do you have sp1 ? Cause I had this problem prior to sp1, but it is
fine
> > > now....hmm did`nt you get threads visible in nuts as well, pre sp1 or
> do
> > I
> > > remember wrong ???
> > >
> > > If you have sp1, maybe you allready have used this particualar nut,
and
> > > therefor it opens the pre sp1 one...maybe ? not even shure if it works
> > that
> > > way.
> > >
> > > Jørgen
> > >
> > > "Rob Singlehurst" wrote in message
> > > news:AF47054FB714CE23A6C2572D6775475C@in.WebX.maYI
> > > > Can someone try inserting one of these from the library and see if
it
> > has
> > > a
> > > > 1.2 mm hole instead of a 12mm hole!!!
> > > >
> > > >
> > > > How poor is that????
> > > >
> > > >
> > > > Cheers,
> > > >
> > > > --Rob Singlehurst
> > > >
> > > >
> > >
> > >
> >
> >
>
>
server name/edit- Choose storage Location and try one of the other options
(not parent assembly)...maybe ? I guess if you have added a library
searchpath you might get that listet or something ?
Jørgen
"Rob Singlehurst"
news:99691795E3F86345ABB1E482798B41ED@in.WebX.maYI
> I have since sorted this out by deleting all of the local.ISO.whatever.ipt
> files in the workgroup search path. Does anyone know why these are not
put
> in the StandardParts folder like they used to be. The only way I can work
> like I used to is then move the parts into the StandardParts folder and
then
> open my original assembly and point to the correct folder.
>
> ???????????????
>
>
> Cheers,
>
> --Rob Singlehurst
>
>
> "Rob Singlehurst"
> news:1531129D0A51F5428587F00A034F666E@in.WebX.maYI
> > Yes, sorry the threads are visible. But SP1 on this morning and hadn't
> > needed that part before SP1. I haven't got an old 5.3 one in
> StandardParts.
> > I had altered threads.xls but have put the original back and it does the
> > same. I may try rebooting, see if it makes any difference.
> >
> > Cheers,
> >
> > --Rob Singlehurst
> >
> > "JGH"
> > news:B0AD6B1BAC34A4777CE4208BFE2238A2@in.WebX.maYI
> > > Do you have sp1 ? Cause I had this problem prior to sp1, but it is
fine
> > > now....hmm did`nt you get threads visible in nuts as well, pre sp1 or
> do
> > I
> > > remember wrong ???
> > >
> > > If you have sp1, maybe you allready have used this particualar nut,
and
> > > therefor it opens the pre sp1 one...maybe ? not even shure if it works
> > that
> > > way.
> > >
> > > Jørgen
> > >
> > > "Rob Singlehurst"
> > > news:AF47054FB714CE23A6C2572D6775475C@in.WebX.maYI
> > > > Can someone try inserting one of these from the library and see if
it
> > has
> > > a
> > > > 1.2 mm hole instead of a 12mm hole!!!
> > > >
> > > >
> > > > How poor is that????
> > > >
> > > >
> > > > Cheers,
> > > >
> > > > --Rob Singlehurst
> > > >
> > > >
> > >
> > >
> >
> >
>
>
*Singlehurst, Rob
Re:
Options
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
11-19-2002 09:06 PM in reply to:
*Singlehurst, Rob
Thanks Jorgen, (not sure how to get the funny o)
That's what I wanted! Pretty about the file names though.
Cheers,
--Rob Singlehurst
"JGH" wrote in message
news:EACB03991E410DF81A32FCB58300D78C@in.WebX.maYI
> Not sure, but try this, In the library browser choose Conigure, dbl click
> server name/edit- Choose storage Location and try one of the other options
> (not parent assembly)...maybe ? I guess if you have added a library
> searchpath you might get that listet or something ?
>
> Jørgen
>
> "Rob Singlehurst" wrote in message
> news:99691795E3F86345ABB1E482798B41ED@in.WebX.maYI
> > I have since sorted this out by deleting all of the
local.ISO.whatever.ipt
> > files in the workgroup search path. Does anyone know why these are not
> put
> > in the StandardParts folder like they used to be. The only way I can
work
> > like I used to is then move the parts into the StandardParts folder and
> then
> > open my original assembly and point to the correct folder.
> >
> > ???????????????
> >
> >
> > Cheers,
> >
> > --Rob Singlehurst
> >
> >
> > "Rob Singlehurst" wrote in message
> > news:1531129D0A51F5428587F00A034F666E@in.WebX.maYI
> > > Yes, sorry the threads are visible. But SP1 on this morning and
hadn't
> > > needed that part before SP1. I haven't got an old 5.3 one in
> > StandardParts.
> > > I had altered threads.xls but have put the original back and it does
the
> > > same. I may try rebooting, see if it makes any difference.
> > >
> > > Cheers,
> > >
> > > --Rob Singlehurst
> > >
> > > "JGH" wrote in message
> > > news:B0AD6B1BAC34A4777CE4208BFE2238A2@in.WebX.maYI
> > > > Do you have sp1 ? Cause I had this problem prior to sp1, but it is
> fine
> > > > now....hmm did`nt you get threads visible in nuts as well, pre sp1
or
> > do
> > > I
> > > > remember wrong ???
> > > >
> > > > If you have sp1, maybe you allready have used this particualar nut,
> and
> > > > therefor it opens the pre sp1 one...maybe ? not even shure if it
works
> > > that
> > > > way.
> > > >
> > > > Jørgen
> > > >
> > > > "Rob Singlehurst" wrote in message
> > > > news:AF47054FB714CE23A6C2572D6775475C@in.WebX.maYI
> > > > > Can someone try inserting one of these from the library and see if
> it
> > > has
> > > > a
> > > > > 1.2 mm hole instead of a 12mm hole!!!
> > > > >
> > > > >
> > > > > How poor is that????
> > > > >
> > > > >
> > > > > Cheers,
> > > > >
> > > > > --Rob Singlehurst
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>
That's what I wanted! Pretty about the file names though.
Cheers,
--Rob Singlehurst
"JGH"
news:EACB03991E410DF81A32FCB58300D78C@in.WebX.maYI
> Not sure, but try this, In the library browser choose Conigure, dbl click
> server name/edit- Choose storage Location and try one of the other options
> (not parent assembly)...maybe ? I guess if you have added a library
> searchpath you might get that listet or something ?
>
> Jørgen
>
> "Rob Singlehurst"
> news:99691795E3F86345ABB1E482798B41ED@in.WebX.maYI
> > I have since sorted this out by deleting all of the
local.ISO.whatever.ipt
> > files in the workgroup search path. Does anyone know why these are not
> put
> > in the StandardParts folder like they used to be. The only way I can
work
> > like I used to is then move the parts into the StandardParts folder and
> then
> > open my original assembly and point to the correct folder.
> >
> > ???????????????
> >
> >
> > Cheers,
> >
> > --Rob Singlehurst
> >
> >
> > "Rob Singlehurst"
> > news:1531129D0A51F5428587F00A034F666E@in.WebX.maYI
> > > Yes, sorry the threads are visible. But SP1 on this morning and
hadn't
> > > needed that part before SP1. I haven't got an old 5.3 one in
> > StandardParts.
> > > I had altered threads.xls but have put the original back and it does
the
> > > same. I may try rebooting, see if it makes any difference.
> > >
> > > Cheers,
> > >
> > > --Rob Singlehurst
> > >
> > > "JGH"
> > > news:B0AD6B1BAC34A4777CE4208BFE2238A2@in.WebX.maYI
> > > > Do you have sp1 ? Cause I had this problem prior to sp1, but it is
> fine
> > > > now....hmm did`nt you get threads visible in nuts as well, pre sp1
or
> > do
> > > I
> > > > remember wrong ???
> > > >
> > > > If you have sp1, maybe you allready have used this particualar nut,
> and
> > > > therefor it opens the pre sp1 one...maybe ? not even shure if it
works
> > > that
> > > > way.
> > > >
> > > > Jørgen
> > > >
> > > > "Rob Singlehurst"
> > > > news:AF47054FB714CE23A6C2572D6775475C@in.WebX.maYI
> > > > > Can someone try inserting one of these from the library and see if
> it
> > > has
> > > > a
> > > > > 1.2 mm hole instead of a 12mm hole!!!
> > > > >
> > > > >
> > > > > How poor is that????
> > > > >
> > > > >
> > > > > Cheers,
> > > > >
> > > > > --Rob Singlehurst
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>
