Layout in Inventor

trus · ‎02-01-2013

What is a layout in Inventor and how is this functinality used?

mpatchus · ‎10-22-2008

From the HELP file.... (always a good place to start, followed by the Tutorials)

Mike Patchus

Inventor 2012 SP1
Vault Pro 2013

Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below.

JDMather · ‎04-20-2006

see page 21

http://home.pct.edu/~jmather/SkillsUSA%20University.pdf

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2013 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2013 SP 1.1 Edu 64-bit
GeForce GTX 560M i7-2670QM @ 2.2GHz 8GB RAM
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
http://www.autodesk.com/edcommunity
Still waiting for -Draft option on any Rib feature.

trus · ‎02-01-2013

Thank you for the highlevel insight.

I do have one last question, does a layout afford an "place" to create parameters and/or develop programmatic logic? "if PART_LENGHT" > 1 then ... else"

JDMather · ‎04-20-2006

F1 iLogic

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2013 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2013 SP 1.1 Edu 64-bit
GeForce GTX 560M i7-2670QM @ 2.2GHz 8GB RAM
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
http://www.autodesk.com/edcommunity
Still waiting for -Draft option on any Rib feature.

Autodesk Inventor

Layout in Inventor

Re: Layout in Inventor

Re: Layout in Inventor

Re: Layout in Inventor

Re: Layout in Inventor