Autodesk Inventor
oops, just noticed that this is a pdf. Don't think I can unfold that
Post the ipt and I'll give it a whirl.
"Kirk A." wrote in message
news:4175915f$1_1@newsprd01...
> I have got this modeled in Inventor the way that I want it. Problem is I
> have had to use the loft command to generate the flight. Inventor will
not
> flatten a loft (known limitation).... ???Where was that wish list
survey???
>
> Would anyone with the Copra Metalbender add-in be willing to flatten this
> for me if I send the file?
>
> I really can't justify the purchase of Copra just to do this one flat.
>
> Thanks
> Kirk
> --
> IV R9, SP1
> Dell PWS360, 2.6ghz, P4
> 2 Gb ram
> nVidia FX1000
> 6.14.10.6808Driver
> 1260x1024x32 bit
>
>
> "Kirk A." wrote in message
> news:41755f84_3@newsprd01...
> > I have got a difficult part that I need to get a flat pattern of. I
have
> > attached a portion of the drawing here. The item that I am needing is
> MK#13
> > in this view. It will have to follow the cone shape then follow the
inside
> > of the tube.
> >
> > Has anyone done anything close to this with Inventor?
> >
> > I need some suggestions on how to get started.
> >
> > Thanks
> > --
> > IV R9, SP1
> > Dell PWS360, 2.6ghz, P4
> > 2 Gb ram
> > nVidia FX1000
> > 6.14.10.6808Driver
> > 1260x1024x32 bit
> >
> >
> >
> >
>
>
Post the ipt and I'll give it a whirl.
"Kirk A."
Thanks. It will be tomorrow sometime before I can get you the ipt.
--
IV R9, SP1
Dell PWS360, 2.6ghz, P4
2 Gb ram
nVidia FX1000
6.14.10.6808Driver
1260x1024x32 bit
"Jimmy" wrote in message
news:41759542$1_2@newsprd01...
> oops, just noticed that this is a pdf. Don't think I can unfold that
> Post the ipt and I'll give it a whirl.
> "Kirk A." wrote in message
> news:4175915f$1_1@newsprd01...
> > I have got this modeled in Inventor the way that I want it. Problem is
I
> > have had to use the loft command to generate the flight. Inventor will
> not
> > flatten a loft (known limitation).... ???Where was that wish list
> survey???
> >
> > Would anyone with the Copra Metalbender add-in be willing to flatten
this
> > for me if I send the file?
> >
> > I really can't justify the purchase of Copra just to do this one flat.
> >
> > Thanks
> > Kirk
> > --
> > IV R9, SP1
> > Dell PWS360, 2.6ghz, P4
> > 2 Gb ram
> > nVidia FX1000
> > 6.14.10.6808Driver
> > 1260x1024x32 bit
> >
> >
> > "Kirk A." wrote in message
> > news:41755f84_3@newsprd01...
> > > I have got a difficult part that I need to get a flat pattern of. I
> have
> > > attached a portion of the drawing here. The item that I am needing is
> > MK#13
> > > in this view. It will have to follow the cone shape then follow the
> inside
> > > of the tube.
> > >
> > > Has anyone done anything close to this with Inventor?
> > >
> > > I need some suggestions on how to get started.
> > >
> > > Thanks
> > > --
> > > IV R9, SP1
> > > Dell PWS360, 2.6ghz, P4
> > > 2 Gb ram
> > > nVidia FX1000
> > > 6.14.10.6808Driver
> > > 1260x1024x32 bit
> > >
> > >
> > >
> > >
> >
> >
>
>
> Post the ipt and I'll give it a whirl.
> "Kirk A."
I just sent the dxfs to you. If they look okay let me know. If not we can
try adjusting compensation methods.
"Kirk A." wrote in message
news:417595cd_2@newsprd01...
> Thanks. It will be tomorrow sometime before I can get you the ipt.
>
> --
> IV R9, SP1
> Dell PWS360, 2.6ghz, P4
> 2 Gb ram
> nVidia FX1000
> 6.14.10.6808Driver
> 1260x1024x32 bit
>
>
> "Jimmy" wrote in message
> news:41759542$1_2@newsprd01...
> > oops, just noticed that this is a pdf. Don't think I can unfold that
> > Post the ipt and I'll give it a whirl.
> > "Kirk A." wrote in message
> > news:4175915f$1_1@newsprd01...
> > > I have got this modeled in Inventor the way that I want it. Problem
is
> I
> > > have had to use the loft command to generate the flight. Inventor
will
> > not
> > > flatten a loft (known limitation).... ???Where was that wish list
> > survey???
> > >
> > > Would anyone with the Copra Metalbender add-in be willing to flatten
> this
> > > for me if I send the file?
> > >
> > > I really can't justify the purchase of Copra just to do this one flat.
> > >
> > > Thanks
> > > Kirk
> > > --
> > > IV R9, SP1
> > > Dell PWS360, 2.6ghz, P4
> > > 2 Gb ram
> > > nVidia FX1000
> > > 6.14.10.6808Driver
> > > 1260x1024x32 bit
> > >
> > >
> > > "Kirk A." wrote in message
> > > news:41755f84_3@newsprd01...
> > > > I have got a difficult part that I need to get a flat pattern of. I
> > have
> > > > attached a portion of the drawing here. The item that I am needing
is
> > > MK#13
> > > > in this view. It will have to follow the cone shape then follow the
> > inside
> > > > of the tube.
> > > >
> > > > Has anyone done anything close to this with Inventor?
> > > >
> > > > I need some suggestions on how to get started.
> > > >
> > > > Thanks
> > > > --
> > > > IV R9, SP1
> > > > Dell PWS360, 2.6ghz, P4
> > > > 2 Gb ram
> > > > nVidia FX1000
> > > > 6.14.10.6808Driver
> > > > 1260x1024x32 bit
> > > >
> > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>
> > Post the ipt and I'll give it a whirl.
> > "Kirk A."
Looked great. I'll let you know how they turn out.
Thanks again,
Kirk
--
IV R9, SP1
Dell PWS360, 2.6ghz, P4
2 Gb ram
nVidia FX1000
6.14.10.6808Driver
1260x1024x32 bit
"Jimmy" wrote in message
news:417684e5_2@newsprd01...
> I just sent the dxfs to you. If they look okay let me know. If not we
can
> try adjusting compensation methods.
> "Kirk A." wrote in message
> news:417595cd_2@newsprd01...
> > Thanks. It will be tomorrow sometime before I can get you the ipt.
> >
> > --
> > IV R9, SP1
> > Dell PWS360, 2.6ghz, P4
> > 2 Gb ram
> > nVidia FX1000
> > 6.14.10.6808Driver
> > 1260x1024x32 bit
> >
> >
> > "Jimmy" wrote in message
> > news:41759542$1_2@newsprd01...
> > > oops, just noticed that this is a pdf. Don't think I can unfold
that
> > > Post the ipt and I'll give it a whirl.
> > > "Kirk A." wrote in message
> > > news:4175915f$1_1@newsprd01...
> > > > I have got this modeled in Inventor the way that I want it. Problem
> is
> > I
> > > > have had to use the loft command to generate the flight. Inventor
> will
> > > not
> > > > flatten a loft (known limitation).... ???Where was that wish list
> > > survey???
> > > >
> > > > Would anyone with the Copra Metalbender add-in be willing to flatten
> > this
> > > > for me if I send the file?
> > > >
> > > > I really can't justify the purchase of Copra just to do this one
flat.
> > > >
> > > > Thanks
> > > > Kirk
> > > > --
> > > > IV R9, SP1
> > > > Dell PWS360, 2.6ghz, P4
> > > > 2 Gb ram
> > > > nVidia FX1000
> > > > 6.14.10.6808Driver
> > > > 1260x1024x32 bit
> > > >
> > > >
> > > > "Kirk A." wrote in message
> > > > news:41755f84_3@newsprd01...
> > > > > I have got a difficult part that I need to get a flat pattern of.
I
> > > have
> > > > > attached a portion of the drawing here. The item that I am
needing
> is
> > > > MK#13
> > > > > in this view. It will have to follow the cone shape then follow
the
> > > inside
> > > > > of the tube.
> > > > >
> > > > > Has anyone done anything close to this with Inventor?
> > > > >
> > > > > I need some suggestions on how to get started.
> > > > >
> > > > > Thanks
> > > > > --
> > > > > IV R9, SP1
> > > > > Dell PWS360, 2.6ghz, P4
> > > > > 2 Gb ram
> > > > > nVidia FX1000
> > > > > 6.14.10.6808Driver
> > > > > 1260x1024x32 bit
> > > > >
> > > > >
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>
> > > Post the ipt and I'll give it a whirl.
> > > "Kirk A." 
