Autodesk Inventor

[#1]

I got the mesg, however, couldn't find the red-cross to open the design
doctor?
Thanks

[#2]

You see the message? Click on the red cross in the message...

--
Sean Dotson, PE
http://www.sdotson.com
Check the Inventor FAQ for most common questions
http://www.sdotson.com/faq.html
-----------------------------------------
"chris" wrote in message
news:f12bfc1.-1@WebX.maYIadrTaRb...
> I got the mesg, however, couldn't find the red-cross to open the design
> doctor?
> Thanks
>
>

[#3]

I dont' see any red-cross !!!
"Sean Dotson" wrote in message
news:3C4659284195AC9443AC4A3AC5E90B76@in.WebX.maYIadrTaRb...
> You see the message? Click on the red cross in the message...
>
> --
> Sean Dotson, PE
> http://www.sdotson.com
> Check the Inventor FAQ for most common questions
> http://www.sdotson.com/faq.html
> -----------------------------------------
> "chris" wrote in message
> news:f12bfc1.-1@WebX.maYIadrTaRb...
> > I got the mesg, however, couldn't find the red-cross to open the design
> > doctor?
> > Thanks
> >
> >
>
>

[#4]

[WARNING] Drawing View Center: problems encountered while executing this
command. [r:\core\Fw\Main\FWxApp.cpp, line 3279]
[WARNING] One or more of the definition points are no longer attached to
the geometry. Drag the dimension definition points to reattach the
dimension. [r:\Application\dldim\Dims\DLxLinDim.cpp,
line 175]

here is what I got - no red-cross !!!



"chris" wrote in message
news:7B3397396AC23B25968A158B7C9C6D56@in.WebX.maYIadrTaRb...
> I dont' see any red-cross !!!
> "Sean Dotson" wrote in message
> news:3C4659284195AC9443AC4A3AC5E90B76@in.WebX.maYIadrTaRb...
> > You see the message? Click on the red cross in the message...
> >
> > --
> > Sean Dotson, PE
> > http://www.sdotson.com
> > Check the Inventor FAQ for most common questions
> > http://www.sdotson.com/faq.html
> > -----------------------------------------
> > "chris" wrote in message
> > news:f12bfc1.-1@WebX.maYIadrTaRb...
> > > I got the mesg, however, couldn't find the red-cross to open the
design
> > > doctor?
> > > Thanks
> > >
> > >
> >
> >
>
>

[#5]

Is there not any dimensions that are purple? If so just drag their endpoints to reattach
them

--
Kent
Member of the Autodesk Discussion Forum Moderator Program


"chris" wrote in message
news:89BFD88AD881BCE7E28CD865F763803E@in.WebX.maYIadrTaRb...
> [WARNING] Drawing View Center: problems encountered while executing this
> command. [r:\core\Fw\Main\FWxApp.cpp, line 3279]
> [WARNING] One or more of the definition points are no longer attached to
> the geometry. Drag the dimension definition points to reattach the
> dimension. [r:\Application\dldim\Dims\DLxLinDim.cpp,
> line 175]
>
> here is what I got - no red-cross !!!
>
>
>
> "chris" wrote in message
> news:7B3397396AC23B25968A158B7C9C6D56@in.WebX.maYIadrTaRb...
> > I dont' see any red-cross !!!
> > "Sean Dotson" wrote in message
> > news:3C4659284195AC9443AC4A3AC5E90B76@in.WebX.maYIadrTaRb...
> > > You see the message? Click on the red cross in the message...
> > >
> > > --
> > > Sean Dotson, PE
> > > http://www.sdotson.com
> > > Check the Inventor FAQ for most common questions
> > > http://www.sdotson.com/faq.html
> > > -----------------------------------------
> > > "chris" wrote in message
> > > news:f12bfc1.-1@WebX.maYIadrTaRb...
> > > > I got the mesg, however, couldn't find the red-cross to open the
> design
> > > > doctor?
> > > > Thanks
> > > >
> > > >
> > >
> > >
> >
> >
>
>

[#6]

There is no dimension - only balloons on an assembly section view. Couldn't
find any purple balloon either !!!

"Kent Keller" wrote in message
news:1B91B356DCDBFFA39F36D3D8E4165061@in.WebX.maYIadrTaRb...
> Is there not any dimensions that are purple? If so just drag their
endpoints to reattach
> them
>
> --
> Kent
> Member of the Autodesk Discussion Forum Moderator Program
>
>
> "chris" wrote in message
> news:89BFD88AD881BCE7E28CD865F763803E@in.WebX.maYIadrTaRb...
> > [WARNING] Drawing View Center: problems encountered while executing this
> > command. [r:\core\Fw\Main\FWxApp.cpp, line 3279]
> > [WARNING] One or more of the definition points are no longer
attached to
> > the geometry. Drag the dimension definition points to reattach the
> > dimension. [r:\Application\dldim\Dims\DLxLinDim.cpp,
> > line 175]
> >
> > here is what I got - no red-cross !!!
> >
> >
> >
> > "chris" wrote in message
> > news:7B3397396AC23B25968A158B7C9C6D56@in.WebX.maYIadrTaRb...
> > > I dont' see any red-cross !!!
> > > "Sean Dotson" wrote in message
> > > news:3C4659284195AC9443AC4A3AC5E90B76@in.WebX.maYIadrTaRb...
> > > > You see the message? Click on the red cross in the message...
> > > >
> > > > --
> > > > Sean Dotson, PE
> > > > http://www.sdotson.com
> > > > Check the Inventor FAQ for most common questions
> > > > http://www.sdotson.com/faq.html
> > > > -----------------------------------------
> > > > "chris" wrote in message
> > > > news:f12bfc1.-1@WebX.maYIadrTaRb...
> > > > > I got the mesg, however, couldn't find the red-cross to open the
> > design
> > > > > doctor?
> > > > > Thanks
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>

[#7]

put a screen capture on the CF so we can see what you see.