Autodesk Inventor

[#1]

I created a sketch in a file using a standard.ipt Template and I should have
used a Sheet metal.ipt template. So, now I can't access the Style and Face
tools on the Sheet metal Panel Bar. Is there a way to exchange Templates in
a file? Thanks, Bob

[#2]

Choose Application/Sheet Metal, then you get all the commands.
/Janne
"Bob Johnson" skrev i meddelandet
news:A5C50EFE16D578ECD96F22FB0FE01101@in.WebX.maYIadrTaRb...
> I created a sketch in a file using a standard.ipt Template and I should
have
> used a Sheet metal.ipt template. So, now I can't access the Style and
Face
> tools on the Sheet metal Panel Bar. Is there a way to exchange Templates
in
> a file? Thanks, Bob
>
>

[#3]

Applications > Sheet Metal

Dennis

Bob Johnson wrote:

> I created a sketch in a file using a standard.ipt Template and I should have
> used a Sheet metal.ipt template. So, now I can't access the Style and Face
> tools on the Sheet metal Panel Bar. Is there a way to exchange Templates in
> a file? Thanks, Bob

--
Dennis Jeffrey
CAD Associates - Fort Wayne
Autodesk University Instructor
Autodesk ASC
(260-432-9695 x 221

[#4]

If you have some things such as materials setup in your sheetmetal template
and you have only done one sketch, it may be worth it to start a new part
using the right template, and then copy the sketch and paste it in the new
ipt file.

Otherwise do as the others suggested.
--
Kent Keller
Member of the Autodesk Discussion Forum Moderator Program

http://www.MyMcad.com/KWiK/Mcad.htm

"Bob Johnson" wrote in message
news:A5C50EFE16D578ECD96F22FB0FE01101@in.WebX.maYIadrTaRb...
> I created a sketch in a file using a standard.ipt Template and I should
have
> used a Sheet metal.ipt template. So, now I can't access the Style and
Face
> tools on the Sheet metal Panel Bar. Is there a way to exchange Templates
in
> a file? Thanks, Bob
>
>