Autodesk Inventor
Reply
Topic Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic to the Top
- Bookmark
- Subscribe
- Printer Friendly Page
*Keith_Bradford
Bracket Flanges
Options
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
70 Views, 14 Replies
11-14-2002 10:11 PM
I have posted files in CF. I have two almost identical Sheetmetal brackets
that have flanges that should be identical, i.e. the height. As far as I
can tell I have selected identical edges, sheetmetal styles etc... but one
is slightly taller than the other. I can not see what is "wrong" with them.
Do you see anything?
TIA,
--
Keith Bradford
CAD Director
SCS/Frigette
817.293.5313
www.scsfrigette.com
(Remove All Numbers From E-mail)
that have flanges that should be identical, i.e. the height. As far as I
can tell I have selected identical edges, sheetmetal styles etc... but one
is slightly taller than the other. I can not see what is "wrong" with them.
Do you see anything?
TIA,
--
Keith Bradford
CAD Director
SCS/Frigette
817.293.5313
www.scsfrigette.com
(Remove All Numbers From E-mail)
*Singlehurst, Rob
Re: Bracket Flanges
Options
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
11-14-2002 10:49 PM in reply to:
*Keith_Bradford
Where are the files Keith?? Can't see them in CF.
--Rob Singlehurst
"Keith_Bradford" <7kbradford7@7scsfrigette7.com> wrote in message
news:10325ABADDD5497ED58F5F0B20BD5F53@in.WebX.maYI
> I have posted files in CF. I have two almost identical Sheetmetal
brackets
> that have flanges that should be identical, i.e. the height. As far as I
> can tell I have selected identical edges, sheetmetal styles etc... but one
> is slightly taller than the other. I can not see what is "wrong" with
them.
> Do you see anything?
>
> TIA,
>
> --
> Keith Bradford
> CAD Director
> SCS/Frigette
> 817.293.5313
> www.scsfrigette.com
> (Remove All Numbers From E-mail)
>
>
--Rob Singlehurst
"Keith_Bradford" <7kbradford7@7scsfrigette7.com> wrote in message
news:10325ABADDD5497ED58F5F0B20BD5F53@in.WebX.maYI
> I have posted files in CF. I have two almost identical Sheetmetal
brackets
> that have flanges that should be identical, i.e. the height. As far as I
> can tell I have selected identical edges, sheetmetal styles etc... but one
> is slightly taller than the other. I can not see what is "wrong" with
them.
> Do you see anything?
>
> TIA,
>
> --
> Keith Bradford
> CAD Director
> SCS/Frigette
> 817.293.5313
> www.scsfrigette.com
> (Remove All Numbers From E-mail)
>
>
*Keith_Bradford
Re:
Options
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
11-14-2002 10:53 PM in reply to:
*Keith_Bradford
For some reason it posted as RE: Bracket
--
Keith Bradford
CAD Director
SCS/Frigette
817.293.5313
www.scsfrigette.com
(Remove All Numbers From E-mail)
"Rob Singlehurst" wrote in message
news:044A1AA115519DF9403388921D0393B5@in.WebX.maYI
> Where are the files Keith?? Can't see them in CF.
>
> --Rob Singlehurst
>
> "Keith_Bradford" <7kbradford7@7scsfrigette7.com> wrote in message
> news:10325ABADDD5497ED58F5F0B20BD5F53@in.WebX.maYI
> > I have posted files in CF. I have two almost identical Sheetmetal
> brackets
> > that have flanges that should be identical, i.e. the height. As far as
I
> > can tell I have selected identical edges, sheetmetal styles etc... but
one
> > is slightly taller than the other. I can not see what is "wrong" with
> them.
> > Do you see anything?
> >
> > TIA,
> >
> > --
> > Keith Bradford
> > CAD Director
> > SCS/Frigette
> > 817.293.5313
> > www.scsfrigette.com
> > (Remove All Numbers From E-mail)
> >
> >
>
>
--
Keith Bradford
CAD Director
SCS/Frigette
817.293.5313
www.scsfrigette.com
(Remove All Numbers From E-mail)
"Rob Singlehurst"
news:044A1AA115519DF9403388921D0393B5@in.WebX.maYI
> Where are the files Keith?? Can't see them in CF.
>
> --Rob Singlehurst
>
> "Keith_Bradford" <7kbradford7@7scsfrigette7.com> wrote in message
> news:10325ABADDD5497ED58F5F0B20BD5F53@in.WebX.maYI
> > I have posted files in CF. I have two almost identical Sheetmetal
> brackets
> > that have flanges that should be identical, i.e. the height. As far as
I
> > can tell I have selected identical edges, sheetmetal styles etc... but
one
> > is slightly taller than the other. I can not see what is "wrong" with
> them.
> > Do you see anything?
> >
> > TIA,
> >
> > --
> > Keith Bradford
> > CAD Director
> > SCS/Frigette
> > 817.293.5313
> > www.scsfrigette.com
> > (Remove All Numbers From E-mail)
> >
> >
>
>
*Keller, Kent
Re: Bracket Flanges
Options
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
11-15-2002 12:47 AM in reply to:
*Keith_Bradford
Keith
I don't see the post in Customer files either. Sometimes OE misses posts for some reason.
I tried looking for it on the Web side, but all the search turned up was this thread,
nothing in customer files
--
Kent
Member of the Autodesk Discussion Forum Moderator Program
"Keith_Bradford" <7kbradford7@7scsfrigette7.com> wrote in message
news:10325ABADDD5497ED58F5F0B20BD5F53@in.WebX.maYI
> I have posted files in CF.
I don't see the post in Customer files either. Sometimes OE misses posts for some reason.
I tried looking for it on the Web side, but all the search turned up was this thread,
nothing in customer files
--
Kent
Member of the Autodesk Discussion Forum Moderator Program
"Keith_Bradford" <7kbradford7@7scsfrigette7.com> wrote in message
news:10325ABADDD5497ED58F5F0B20BD5F53@in.WebX.maYI
> I have posted files in CF.
*Singlehurst, Rob
Re:
Options
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
11-15-2002 12:49 AM in reply to:
*Keith_Bradford
Nope still can's see it!!
--Rob Singlehurst
"Keith_Bradford" <7kbradford7@7scsfrigette7.com> wrote in message
news:2DF69F955D08C426594AE29D5EDE3B68@in.WebX.maYI
>
>
> For some reason it posted as RE: Bracket
>
>
>
> --
> Keith Bradford
> CAD Director
> SCS/Frigette
> 817.293.5313
> www.scsfrigette.com
> (Remove All Numbers From E-mail)
> "Rob Singlehurst" wrote in message
> news:044A1AA115519DF9403388921D0393B5@in.WebX.maYI
> > Where are the files Keith?? Can't see them in CF.
> >
> > --Rob Singlehurst
> >
> > "Keith_Bradford" <7kbradford7@7scsfrigette7.com> wrote in message
> > news:10325ABADDD5497ED58F5F0B20BD5F53@in.WebX.maYI
> > > I have posted files in CF. I have two almost identical Sheetmetal
> > brackets
> > > that have flanges that should be identical, i.e. the height. As far
as
> I
> > > can tell I have selected identical edges, sheetmetal styles etc... but
> one
> > > is slightly taller than the other. I can not see what is "wrong" with
> > them.
> > > Do you see anything?
> > >
> > > TIA,
> > >
> > > --
> > > Keith Bradford
> > > CAD Director
> > > SCS/Frigette
> > > 817.293.5313
> > > www.scsfrigette.com
> > > (Remove All Numbers From E-mail)
> > >
> > >
> >
> >
>
>
--Rob Singlehurst
"Keith_Bradford" <7kbradford7@7scsfrigette7.com> wrote in message
news:2DF69F955D08C426594AE29D5EDE3B68@in.WebX.maYI
>
>
> For some reason it posted as RE: Bracket
>
>
>
> --
> Keith Bradford
> CAD Director
> SCS/Frigette
> 817.293.5313
> www.scsfrigette.com
> (Remove All Numbers From E-mail)
> "Rob Singlehurst"
> news:044A1AA115519DF9403388921D0393B5@in.WebX.maYI
> > Where are the files Keith?? Can't see them in CF.
> >
> > --Rob Singlehurst
> >
> > "Keith_Bradford" <7kbradford7@7scsfrigette7.com> wrote in message
> > news:10325ABADDD5497ED58F5F0B20BD5F53@in.WebX.maYI
> > > I have posted files in CF. I have two almost identical Sheetmetal
> > brackets
> > > that have flanges that should be identical, i.e. the height. As far
as
> I
> > > can tell I have selected identical edges, sheetmetal styles etc... but
> one
> > > is slightly taller than the other. I can not see what is "wrong" with
> > them.
> > > Do you see anything?
> > >
> > > TIA,
> > >
> > > --
> > > Keith Bradford
> > > CAD Director
> > > SCS/Frigette
> > > 817.293.5313
> > > www.scsfrigette.com
> > > (Remove All Numbers From E-mail)
> > >
> > >
> >
> >
>
>
*Maenpaa, Mike
Re:
Options
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
11-15-2002 01:03 AM in reply to:
*Keith_Bradford
I see it.
Search for "Bracket"
It was appended to a post with the same subject, by Russ Walker on 12/10/01
Mike
"Kent Keller" wrote in message
news:C6BB200C0BD7DD4F6EA89B039C1B4C3E@in.WebX.maYI
> Keith
>
> I don't see the post in Customer files either. Sometimes OE misses posts
for some reason.
> I tried looking for it on the Web side, but all the search turned up was
this thread,
> nothing in customer files
> --
> Kent
> Member of the Autodesk Discussion Forum Moderator Program
>
>
> "Keith_Bradford" <7kbradford7@7scsfrigette7.com> wrote in message
> news:10325ABADDD5497ED58F5F0B20BD5F53@in.WebX.maYI
> > I have posted files in CF.
>
>
Search for "Bracket"
It was appended to a post with the same subject, by Russ Walker on 12/10/01
Mike
"Kent Keller"
news:C6BB200C0BD7DD4F6EA89B039C1B4C3E@in.WebX.maYI
> Keith
>
> I don't see the post in Customer files either. Sometimes OE misses posts
for some reason.
> I tried looking for it on the Web side, but all the search turned up was
this thread,
> nothing in customer files
> --
> Kent
> Member of the Autodesk Discussion Forum Moderator Program
>
>
> "Keith_Bradford" <7kbradford7@7scsfrigette7.com> wrote in message
> news:10325ABADDD5497ED58F5F0B20BD5F53@in.WebX.maYI
> > I have posted files in CF.
>
>
*Keith_Bradford
Re:
Options
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
11-15-2002 01:18 AM in reply to:
*Keith_Bradford
Thanks Mike...I will repost it under Keith Bracket.
--
Keith Bradford
CAD Director
SCS/Frigette
817.293.5313
www.scsfrigette.com
(Remove All Numbers From E-mail)
"Mike Maenpaa" wrote in message
news:A40832703DD55AF24A85E4E31CF10FCD@in.WebX.maYI
> I see it.
> Search for "Bracket"
> It was appended to a post with the same subject, by Russ Walker on
12/10/01
> Mike
>
> "Kent Keller" wrote in message
> news:C6BB200C0BD7DD4F6EA89B039C1B4C3E@in.WebX.maYI
> > Keith
> >
> > I don't see the post in Customer files either. Sometimes OE misses
posts
> for some reason.
> > I tried looking for it on the Web side, but all the search turned up was
> this thread,
> > nothing in customer files
> > --
> > Kent
> > Member of the Autodesk Discussion Forum Moderator Program
> >
> >
> > "Keith_Bradford" <7kbradford7@7scsfrigette7.com> wrote in message
> > news:10325ABADDD5497ED58F5F0B20BD5F53@in.WebX.maYI
> > > I have posted files in CF.
> >
> >
>
>
--
Keith Bradford
CAD Director
SCS/Frigette
817.293.5313
www.scsfrigette.com
(Remove All Numbers From E-mail)
"Mike Maenpaa"
news:A40832703DD55AF24A85E4E31CF10FCD@in.WebX.maYI
> I see it.
> Search for "Bracket"
> It was appended to a post with the same subject, by Russ Walker on
12/10/01
> Mike
>
> "Kent Keller"
> news:C6BB200C0BD7DD4F6EA89B039C1B4C3E@in.WebX.maYI
> > Keith
> >
> > I don't see the post in Customer files either. Sometimes OE misses
posts
> for some reason.
> > I tried looking for it on the Web side, but all the search turned up was
> this thread,
> > nothing in customer files
> > --
> > Kent
> > Member of the Autodesk Discussion Forum Moderator Program
> >
> >
> > "Keith_Bradford" <7kbradford7@7scsfrigette7.com> wrote in message
> > news:10325ABADDD5497ED58F5F0B20BD5F53@in.WebX.maYI
> > > I have posted files in CF.
> >
> >
>
>
*Keller, Kent
Re: Bracket Flanges
Options
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
11-15-2002 01:41 AM in reply to:
*Keith_Bradford
Keith
Are you talking about Flange 1 in each file? One is adaptive and has a different dim than
the other?? The face sketches don't have dims and the other flange appears to be the same
lengths
--
Kent
Member of the Autodesk Discussion Forum Moderator Program
"Keith_Bradford" <7kbradford7@7scsfrigette7.com> wrote in message
news:10325ABADDD5497ED58F5F0B20BD5F53@in.WebX.maYI
> I have posted files in CF. I have two almost identical Sheetmetal brackets
> that have flanges that should be identical, i.e. the height.
Are you talking about Flange 1 in each file? One is adaptive and has a different dim than
the other?? The face sketches don't have dims and the other flange appears to be the same
lengths
--
Kent
Member of the Autodesk Discussion Forum Moderator Program
"Keith_Bradford" <7kbradford7@7scsfrigette7.com> wrote in message
news:10325ABADDD5497ED58F5F0B20BD5F53@in.WebX.maYI
> I have posted files in CF. I have two almost identical Sheetmetal brackets
> that have flanges that should be identical, i.e. the height.
*Maenpaa, Mike
Re:
Options
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
11-15-2002 01:57 AM in reply to:
*Keith_Bradford
I noticed that too. On one part, the edge selected for the flange is the
inside edge. On the other part, the outside edge is selected.
Keith, are you wondering why it's off by .001?
Mike
"Kent Keller" wrote in message
news:AF260166F91B6BE666734D85BF88B105@in.WebX.maYI
> Keith
>
> Are you talking about Flange 1 in each file? One is adaptive and has a
different dim than
> the other?? The face sketches don't have dims and the other flange
appears to be the same
> lengths
>
> --
> Kent
> Member of the Autodesk Discussion Forum Moderator Program
>
>
> "Keith_Bradford" <7kbradford7@7scsfrigette7.com> wrote in message
> news:10325ABADDD5497ED58F5F0B20BD5F53@in.WebX.maYI
> > I have posted files in CF. I have two almost identical Sheetmetal
brackets
> > that have flanges that should be identical, i.e. the height.
>
>
inside edge. On the other part, the outside edge is selected.
Keith, are you wondering why it's off by .001?
Mike
"Kent Keller"
news:AF260166F91B6BE666734D85BF88B105@in.WebX.maYI
> Keith
>
> Are you talking about Flange 1 in each file? One is adaptive and has a
different dim than
> the other?? The face sketches don't have dims and the other flange
appears to be the same
> lengths
>
> --
> Kent
> Member of the Autodesk Discussion Forum Moderator Program
>
>
> "Keith_Bradford" <7kbradford7@7scsfrigette7.com> wrote in message
> news:10325ABADDD5497ED58F5F0B20BD5F53@in.WebX.maYI
> > I have posted files in CF. I have two almost identical Sheetmetal
brackets
> > that have flanges that should be identical, i.e. the height.
>
>
*Keith_Bradford
Re:
Options
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
11-15-2002 02:24 AM in reply to:
*Keith_Bradford
Ok, sorry about the ambiguity of the information provided. I will try to
get us looking and thinking the same. I think that I inadvertantly posted
the wrong brackets. I have reposted REVa.zip in Keith Bracket. This
assembly should have all neccessary constraints placed so that you may see
the problem. Yes I did make one of the flanges Adaptive but only to try and
solve this issue. I thought that if I made Flange 1 of one of the
componets, adaptive that I could constrain it to equal the height of the
other flange. I removed the Adaptivity of the flanges in this latest post.
I have ensured that the lasted posted files have flange 1 height set at
.405.
Thank you for your patience.
--
Keith Bradford
CAD Director
SCS/Frigette
817.293.5313
www.scsfrigette.com
(Remove All Numbers From E-mail)
"Kent Keller" wrote in message
news:AF260166F91B6BE666734D85BF88B105@in.WebX.maYI
> Keith
>
> Are you talking about Flange 1 in each file? One is adaptive and has a
different dim than
> the other?? The face sketches don't have dims and the other flange
appears to be the same
> lengths
>
> --
> Kent
> Member of the Autodesk Discussion Forum Moderator Program
>
>
> "Keith_Bradford" <7kbradford7@7scsfrigette7.com> wrote in message
> news:10325ABADDD5497ED58F5F0B20BD5F53@in.WebX.maYI
> > I have posted files in CF. I have two almost identical Sheetmetal
brackets
> > that have flanges that should be identical, i.e. the height.
>
>
get us looking and thinking the same. I think that I inadvertantly posted
the wrong brackets. I have reposted REVa.zip in Keith Bracket. This
assembly should have all neccessary constraints placed so that you may see
the problem. Yes I did make one of the flanges Adaptive but only to try and
solve this issue. I thought that if I made Flange 1 of one of the
componets, adaptive that I could constrain it to equal the height of the
other flange. I removed the Adaptivity of the flanges in this latest post.
I have ensured that the lasted posted files have flange 1 height set at
.405.
Thank you for your patience.
--
Keith Bradford
CAD Director
SCS/Frigette
817.293.5313
www.scsfrigette.com
(Remove All Numbers From E-mail)
"Kent Keller"
news:AF260166F91B6BE666734D85BF88B105@in.WebX.maYI
> Keith
>
> Are you talking about Flange 1 in each file? One is adaptive and has a
different dim than
> the other?? The face sketches don't have dims and the other flange
appears to be the same
> lengths
>
> --
> Kent
> Member of the Autodesk Discussion Forum Moderator Program
>
>
> "Keith_Bradford" <7kbradford7@7scsfrigette7.com> wrote in message
> news:10325ABADDD5497ED58F5F0B20BD5F53@in.WebX.maYI
> > I have posted files in CF. I have two almost identical Sheetmetal
brackets
> > that have flanges that should be identical, i.e. the height.
>
>
