Ballistic Knife Variation Help

bakeraustin47 · ‎08-07-2012

I am a novice when it comes to inventor and i am trying to make my spin on a ballistic knife. instead of the classic trigger mechanism used i am using a peg/slot mechanism to fire. i need a peg less than .9 in in diameter that will slide in the "L" hole i made in the knife projectile. I would enjoy someone who could attach the peg so i can assemble it. Here are the files so you can mess with them. The cap attaches to the bottom of the handle. thanks in advance.

JDMather · ‎04-20-2006

Many of your sketches are unconstrained and no dimensions?

What is the tap drill size for a 1.125-7 thread?

I recommend you start here http://home.pct.edu/~jmather/SkillsUSA%20University.pdf

Once you have the parts dimensioned I can probably help out.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2013 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2013 SP 1.1 Edu 64-bit
GeForce GTX 560M i7-2670QM @ 2.2GHz 8GB RAM
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
http://www.autodesk.com/edcommunity
Still waiting for -Draft option on any Rib feature.

Autodesk Inventor

Ballistic Knife Variation Help

Re: Ballistic Knife Variation Help