Autodesk Inventor Publisher

[#1]

loving the software, but having some issues with the output. 

setting up the screen sizes and what type of output seems to be a bit fuzzy. when you are making something for print (say word template) should this same publisher file work well for mobile divice output without much fussing with the file?  i seem to be not grasping this part... just when i think i get something looking good i then push it out to mobile and things look nothing like the screen or print version.

thanks

-ian

[#2]

Hello Ian,

Thank you for the feedback.

Please try to edit the PPI in right of the publish area

change the PPI to 300 , it will looks better when publish to word and image.

refer to attched image.

Regards,

Peggy

--Autodesk Inventor Publisher QA

[#3]

Hi Ian -

Different outputs require different setup values, so that is most likely why you are experiencing some inconsistencies when exporting a presentation set up for Print to Mobile.

It's a good idea to set up a seperate storyboard for each output format. After the presentation has been completed, simply copy/paste the Storyboard to create an identical copy to manipulate. See screenshot below for a sample.

<see attachment: storyboards.png>

Inside the Mobile storyboard, you can quickly set the Publish Area appropriately using the "set affected snapshots" command. Right-click on any snapshot within the Mobile storyboard and select Set Affected Snapshots for All Snapshots within the Storyboard.

<see attachment: set affected snapshots.png>

With the snapshots activated, modify the Publish Area to the appropriate iPad settings (1024x768).

<see attachment: publish area.png>

This will automatically update the Publish Area of every snapshot within the storyboard to these settings. At this point, it's a good idea to take a pass through the snapshots and ensure the views are within the boundaries.

You're now ready to publish to Mobile with much higher fidelity than before.

Good Luck!

Timera Hart

Autodesk