I have two parts made of Sheet Metal.
In the sketch of the Face I made an offset and linked to a parameter.
The intention is that I want to use the offset in a iMate to the thickness of the paint line to be determined.
I want my parts placed with the netto size and the imates use the lakdikte to give as yet on the total size to get.
I have the parameters associated with excel.
For the panel I have two parameters linked in a new parameter and placed the parameter in the offset of the iMate.
When I place the bandraster and then the panel i can not use that imates.
If I have a single parameter in the iMate , so no associated parameter, then it works well only I have the lakdikte of the two parts are not connected and I have to retrofit.
Why can't I place a associated parameter in an iMate ?
Maybe that is the issue which related to the iMate. I will double check with the Inventor QA and update on you later.
Sorry for the inconvenience that will take to you.
Thanks for your concern.
I have now also another solution.
I now use work planes with an offset and the offset I have a parameter linked to the paint thickness to control.
On the work planes I place now the iMates.
Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register
Start with some of our most frequented solutions to get help installing your software.
|Autodesk Factory Design Suite General|