Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Hello again!
I opened a drawing and previewed the wall styles and used one or two on an experimental drawing.
Now when I go to Wall Styles they have all disappeared.
Have some files been mysteriously deleted from our system.
The drawing that I tested the walls on still exists and when I go to Wall Styles in it, they are all there!
Hello
again! I opened a drawing and previewed the wall styles and used one or
two on an experimental drawing. Now when I go to Wall Styles they have all
disappeared. Have some files been mysteriously deleted from our system.
The drawing that I tested the walls on still exists and when I go to Wall
Styles in it, they are all there!
Thank you Michael!
Although I'm still somewhat in the dark because they were on ADT originally as I transferred them from there - I'm positive I did!
There were styles starting with CMU which I believe are 'americanised' wall styles.
Nobody else in the office can find them and the finger is pointing at ME!
RLW
Open the Style Manager using the Wall Styles pulldown (or AecWallStyle
command) and then select the open drawing toolbar button. Then
a) In the Open dialog, browse to your template directory (probably
'c:\Program Files\Autodesk Architectural Desktop 4\template") after
selecting 'Drawing Template *.dwt' in the Files of type list
b) Then select AEC Arch (Imperial).dwt or AEC Arch (Imperial - Intl).dwt
Alternatively you can look in the "Wall Styles - CMU (Imperial).dwg" file
that is also supplied (remember not to change the files of type item as
above) or "Wall Styles - CMU (Metric).dwg if you installed metric content
--
mark webb
software engineer
building industry division, autodesk inc
** please do not email directly, unless direct information has been
requested.
** please direct all questions about any aspects of Architectural Desktop to
the hosted newsgroups
Whoops, little slip there, thanks Paul.. these instructions are only valid
for some time in the distant future.. 🙂
Please replace all 4's with a 3 or 3.3..
--
mark webb
software engineer
building industry division, autodesk inc
** please do not email directly, unless direct information has been
requested.
** please direct all questions about any aspects of Architectural Desktop to
the hosted newsgroups
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")