Autodesk Architectural Desktop 2007 & Prior

[#1]

In our office we typically set out text height at 3/32". So in an 1/8" drawing our text is 9" high. My problem is with some of the tags. When I set my drawing scale to 1/8" it won't let me set the anno plot size to 3/32". It will only allow 1/16 or 1/8. Anyone have any ideas on how to get my tags to plot out at 3/32?

[#2]

It sounds like linear precision is set to 1/16" instead of 1/32". From the Desktop menu, choose Drawing Setup and under the Units
tab check the linear precision setting. If you want to use an annotation plot size of 3/32", then your linear precision must be at
1/32" or lower.

Tony
Discussion Moderator
WW Support & Services, Autodesk
Discussion Q&A: http://discussion.autodesk.com

"JasonO" wrote in message news:ef47cf4.-1@WebX.SaUCah8kaAW...
> In our office we typically set out text height at 3/32". So in an 1/8" drawing our text is 9" high. My problem is with some of the
tags. When I set my drawing scale to 1/8" it won't let me set the anno plot size to 3/32". It will only allow 1/16 or 1/8. Anyone
have any ideas on how to get my tags to plot out at 3/32?
>

[#3]

Thank you, Thank you

I knew it had to be something simple like that.

Jason

[#4]

yep; thanks your solution worked for me too!