AutoSketch

[#1]

I HAVE SUTOSKETCH 9

WHEN I GO TO EDIT-TRANSFORM-TRANSLATE: I GET IT T O MOVE WHERE I WANT IT, HOWEVER THE ORIGINAL PART OF THE DRAWING IS STILL SHOWING. WHEN I AM MOVING IT AN INCH AWAY IT IS VERY DIFICULT THE MANUALLY DELETE IT.

IT USED TO WORK FINE

THANK YOU 

HOWARD 

[#2]

In v10 there's a tickbox that turns off 'make a copy' when you translate, scale, mirror, etc.

[#3]

AS YOU KNOW I HAVE VERSION 9 -  THIS PROBLEM IS NEW. I  DON'T WANT TO SPEND $250 FOR A NEWER VERSION.

[#4]

Look on the left had side of your EDIT BAR and you will find a tick in a box.

Remove it and all will be well.

[#5 · Accepted solution]

When you select transform a tickbox does indeed show up just below the layers drop-down in the property toolbar, at least that's where it appears on my three 'puters.  Not a new problem, my oldest version is AS6 and I also work with v10.  Same tickbox, same place, though I will admit I have not worked with v9.  When you select transform look towards the upper left-hand corner of the AS desktop.  Should be there.  Make sure it is not ticked.  Move entities 'til you heart's content.  Nice.

[#6]

THANK YOU FOR YOUR HELP