AutoSketch

[#1]

Guys,

I have posted this question before, but I'm still none the wiser.

Using AS6.01, I have on my snap mode toolbar a button which defines itself
as "Snap to Face".

It tends to crash the program if used.

But, I can find no information on this feature in the manual, and I have no
idea where it came from.

Can anybody put me out of my misery on this please?

Regards

Barry Pike

[#2]

"B Pike" wrote in message
news:150278516490BE787CED62BCE5A5F459@in.WebX.maYIadrTaRb...
> Guys,
>
> I have posted this question before, but I'm still none the wiser.
>
> Using AS6.01, I have on my snap mode toolbar a button which defines itself
> as "Snap to Face".
>
> It tends to crash the program if used.
>
> But, I can find no information on this feature in the manual, and I have
no
> idea where it came from.
>
> Can anybody put me out of my misery on this please?
>
> Regards
>
> Barry Pike
>
Barry

I am using AS6.01 straight from the box
My SNAP toolbar has 15 SNAP commands , none mention FACE . How many do you
have ?

Regs
Graeme

[#3]

Hello

This is not a feature of AutoSketch and is a leftover from many years ago,
probably Drafix.

I presume this is a custom toolbar or a glitch during installation.

Right click on the toolbar and then customise and see if it can be dragged
off the toolbar.

Paul Jackson

"B Pike" wrote in message
news:150278516490BE787CED62BCE5A5F459@in.WebX.maYIadrTaRb...
> Guys,
>
> I have posted this question before, but I'm still none the wiser.
>
> Using AS6.01, I have on my snap mode toolbar a button which defines itself
> as "Snap to Face".
>
> It tends to crash the program if used.
>
> But, I can find no information on this feature in the manual, and I have
no
> idea where it came from.
>
> Can anybody put me out of my misery on this please?
>
> Regards
>
> Barry Pike
>
>

[#4]

Paul,

You were right!!

Checked an old Drafix program.
It had an all-purpose Customer Courtesy option.
Showed pictures and addresses of various Autodesk
executives who immediately would take care of user's
problems and fix possible errors by sending patches via
email to all their valued and appreciated customers.

Those must have been the so-called "Good old times".

Gerhard

Paul Jackson wrote:
>
> Hello
>
> This is not a feature of AutoSketch and is a leftover from many years ago,
> probably Drafix.
>
> I presume this is a custom toolbar or a glitch during installation.
>
> Right click on the toolbar and then customise and see if it can be dragged
> off the toolbar.
>
> Paul Jackson
>
> "B Pike" wrote in message
> news:150278516490BE787CED62BCE5A5F459@in.WebX.maYIadrTaRb...
> > Guys,
> >
> > I have posted this question before, but I'm still none the wiser.
> >
> > Using AS6.01, I have on my snap mode toolbar a button which defines itself
> > as "Snap to Face".
> >
> > It tends to crash the program if used.
> >
> > But, I can find no information on this feature in the manual, and I have
> no
> > idea where it came from.
> >
> > Can anybody put me out of my misery on this please?
> >
> > Regards
> >
> > Barry Pike
> >
> >