AutoSketch

Reply
*Weiner, Don
Message 1 of 7 (155 Views)

Microstation Files

155 Views, 6 Replies
12-06-2001 06:25 AM
Is there any easy way to import Microstation (r) .dgn files into AS7?

Thanx,

Don Weiner, PE, RCDD
Don Weiner Associates
*Norris, Ric
Message 2 of 7 (155 Views)

Re: Microstation Files

12-06-2001 08:29 AM in reply to: *Weiner, Don
The Microstation file firstly needs to be saved as a .DWG at best or a .DXF
at worst.....there ain't no other options.

Ric Norris.
http://users.bigpond.net.au/cavedrawings


"Don Weiner" wrote in message
news:3C0FF045.2FC15553@bellatlantic.net...
> Is there any easy way to import Microstation (r) .dgn files into AS7?
>
> Thanx,
>
> Don Weiner, PE, RCDD
> Don Weiner Associates
>
*Ehman, John
Message 3 of 7 (155 Views)

Re: Microstation Files

12-06-2001 08:31 AM in reply to: *Weiner, Don
I import into TurboCad and then export as .dwg. It is as good as any
conversion software I have tried but none of them are perfect. It takes some
cleaning up.
John
"Don Weiner" wrote in message
news:3C0FF045.2FC15553@bellatlantic.net...
> Is there any easy way to import Microstation (r) .dgn files into AS7?
>
> Thanx,
>
> Don Weiner, PE, RCDD
> Don Weiner Associates
>
*Rafuse, L.
Message 4 of 7 (155 Views)

Re: Microstation Files

12-07-2001 06:13 AM in reply to: *Weiner, Don
I use Solid Edge Origin to convert from DGN to DWG. AutoSketch can read
the DWG.

--
Len Rafuse
Vision Engineering


Don Weiner wrote:

> Is there any easy way to import Microstation (r) .dgn files into AS7?
>
> Thanx,
>
> Don Weiner, PE, RCDD
> Don Weiner Associates
*Weiner, Don
Message 5 of 7 (155 Views)

Re:

12-07-2001 07:43 AM in reply to: *Weiner, Don
Len,

Thanx for the info. Are you located in Europe? Unfortunately the offer for
Solid Edge Origin is not available in the US. Oh well.


Don Weiner, PE, RCDD
Don Weiner Associates

"L. Rafuse" wrote:

> I use Solid Edge Origin to convert from DGN to DWG. AutoSketch can read
> the DWG.
>
> --
> Len Rafuse
> Vision Engineering
*Rafuse, L.
Message 6 of 7 (155 Views)

Re:

12-07-2001 08:04 PM in reply to: *Weiner, Don
No. It was available in the US.

--
Len Rafuse
Vision Engineering


Don Weiner wrote:

> Len,
>
> Thanx for the info. Are you located in Europe? Unfortunately the offer for
> Solid Edge Origin is not available in the US. Oh well.
>
> Don Weiner, PE, RCDD
> Don Weiner Associates
>
> "L. Rafuse" wrote:
>
> > I use Solid Edge Origin to convert from DGN to DWG. AutoSketch can read
> > the DWG.
> >
> > --
> > Len Rafuse
> > Vision Engineering
Member
Posts: 3
Registered: ‎07-17-2007
Message 7 of 7 (155 Views)

Re: Microstation Files

07-17-2007 02:34 PM in reply to: *Weiner, Don
What about AS 9 DWG to Microstation .dgn files?

Thanks, Ken

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you interested in helping shape the Autodesk Community?
We’re looking at a few different ways to improve the “All Forums” landing page and need your feedback! If interested, please take a few minutes to fill out the following Usability Study. Thank you for your time!

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community