AutoSketch
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Microstation Files

6 REPLIES 6
Reply
Message 1 of 7
Anonymous
460 Views, 6 Replies

Microstation Files

Is there any easy way to import Microstation (r) .dgn files into AS7?

Thanx,

Don Weiner, PE, RCDD
Don Weiner Associates
6 REPLIES 6
Message 2 of 7
Anonymous
in reply to: Anonymous

The Microstation file firstly needs to be saved as a .DWG at best or a .DXF
at worst.....there ain't no other options.

Ric Norris.
http://users.bigpond.net.au/cavedrawings


"Don Weiner" wrote in message
news:3C0FF045.2FC15553@bellatlantic.net...
> Is there any easy way to import Microstation (r) .dgn files into AS7?
>
> Thanx,
>
> Don Weiner, PE, RCDD
> Don Weiner Associates
>
Message 3 of 7
Anonymous
in reply to: Anonymous

I import into TurboCad and then export as .dwg. It is as good as any
conversion software I have tried but none of them are perfect. It takes some
cleaning up.
John
"Don Weiner" wrote in message
news:3C0FF045.2FC15553@bellatlantic.net...
> Is there any easy way to import Microstation (r) .dgn files into AS7?
>
> Thanx,
>
> Don Weiner, PE, RCDD
> Don Weiner Associates
>
Message 4 of 7
Anonymous
in reply to: Anonymous

I use Solid Edge Origin to convert from DGN to DWG. AutoSketch can read
the DWG.

--
Len Rafuse
Vision Engineering


Don Weiner wrote:

> Is there any easy way to import Microstation (r) .dgn files into AS7?
>
> Thanx,
>
> Don Weiner, PE, RCDD
> Don Weiner Associates
Message 5 of 7
Anonymous
in reply to: Anonymous

Len,

Thanx for the info. Are you located in Europe? Unfortunately the offer for
Solid Edge Origin is not available in the US. Oh well.


Don Weiner, PE, RCDD
Don Weiner Associates

"L. Rafuse" wrote:

> I use Solid Edge Origin to convert from DGN to DWG. AutoSketch can read
> the DWG.
>
> --
> Len Rafuse
> Vision Engineering
Message 6 of 7
Anonymous
in reply to: Anonymous

No. It was available in the US.

--
Len Rafuse
Vision Engineering


Don Weiner wrote:

> Len,
>
> Thanx for the info. Are you located in Europe? Unfortunately the offer for
> Solid Edge Origin is not available in the US. Oh well.
>
> Don Weiner, PE, RCDD
> Don Weiner Associates
>
> "L. Rafuse" wrote:
>
> > I use Solid Edge Origin to convert from DGN to DWG. AutoSketch can read
> > the DWG.
> >
> > --
> > Len Rafuse
> > Vision Engineering
Message 7 of 7
Kennw
in reply to: Anonymous

What about AS 9 DWG to Microstation .dgn files?

Thanks, Ken

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report