AutoSketch

[#1]

Is it possible to import existing Turbocad Files (TCW)into Autosketch Release 7?

[#2]

I have done some work in TurboCAD and converted it to AutoSketch via DWG. Sometimes
there is a problem with text moving and line thickness. For the most part my files
have looked OK.

AutoSketch 6 uses DWG rev 14 file format. This seems to work well. I think AS 7
uses DWG 2000 and others here have reported issues with its ability to read DWG
files.

--
Len Rafuse
Vision Engineering

Fugg wrote:

> Is it possible to import existing Turbocad Files (TCW)into Autosketch Release 7?

[#3]

Hello

AutoSketch can import DWG and DXF files.

However line styles and symbols may change, so don't expect 100%, probably
80%. This also depends on TurboCAD export configuration and computability.

Paul Jackson

Fugg wrote in message ...
>Is it possible to import existing Turbocad Files (TCW)into Autosketch
Release 7?

[#4]

Hello --

Using the DXF format to copy from TCAD to QC7 (and I suppose to
AS6 or AS7) works pretty well -- *but* please delete any
"Construction Lines" from the TCAD drawing before converting.
These lines if converted can cause the most frustrating and
obscure errors to appear in your QC (and probably also AS) files;
quite often, after a long period of use in the QC world.

Take care,
Will

Paul Jackson wrote:

> Hello AutoSketch can import DWG and DXF files. However line
> styles and symbols may change, so don't expect 100%, probably
> 80%. This also depends on TurboCAD export configuration and
> computability. Paul Jackson Fugg wrote in message ... >Is it
> possible to import existing Turbocad Files (TCW)into Autosketch
> Release 7?