Zoom out issue using 3DORBIT, 3DROTATE, 3DMOVE - AutoCAD 2014 Mac

[insanoff]

When I try to use one of the 3d commands (3DORBIT, 3DROTATE, 3DMOVE) I loose my current view on the screen and Autocad shows me only empty grid. If I click enter it zooms far away out and I have to zoom in again. As the end effect those commands doesnt work.

And also when I click on View Cube nothing happens.

Video: https://www.youtube.com/watch?v=7hxtmddpjZk&list=UU5qHM-osJKYNgAWuwnjZmhw

[maxim_k]

Never seen such issue. Maybe something wrong in your drawing?
Could you attach the drawing here?

Maxim

[insanoff]

It's because of drawing, but I how it can be?

Please find attached file. 

[maxim_k]

There was a problem in your drawing with viewport configuration.

I ran AUDIT command:

Command: AUDIT
Fix any errors detected? [Yes/No] <N>: y
Auditing Header
Auditing Tables
Auditing Entities Pass 1
Pass 1 100 objects audited
Invalid viewport-configuration name "*Multiple" found.
Changed to "AUDIT_I_140722164357-20".
AcDbViewportTableRecord: "AUDIT_I_140722164357-20"
Tilemode Viewport Corners Not filling up whole screen Set to 0,0..1,1
Invalid viewport-configuration name "*Multiple" found.
Changed to "AUDIT_I_140722164357-21".
AcDbViewportTableRecord: "AUDIT_I_140722164357-21"
Tilemode Viewport Corners Not filling up whole screen Set to 0,0..1,1
Invalid viewport-configuration name "*Multiple" found.
Changed to "AUDIT_I_140722164357-22".
AcDbViewportTableRecord: "AUDIT_I_140722164357-22"
Tilemode Viewport Corners Not filling up whole screen Set to 0,0..1,1
Invalid viewport-configuration name "*Multiple" found.
Changed to "AUDIT_I_140722164357-23".
AcDbViewportTableRecord: "AUDIT_I_140722164357-23"
Tilemode Viewport Corners Not filling up whole screen Set to 0,0..1,1
Pass 1 2600 objects audited
Auditing Entities Pass 2
Pass 2 2600 objects audited
Auditing Blocks
14 Blocks audited
Auditing AcDsRecords
Regenerating model.
Total errors found 8 fixed 8
Erased 0 objects

changed Visual Style to Concept, than back to 2D Wireframe, and it appears the drawing is good now.

Try it.

Maxim

[insanoff]

Thank you for quick reply!

AUDIT doesn't work for me. And I also tried from Concept to 2DWireframe.

[maxim_k]

You can try to search solutions for "Tilemode Viewport Corners Not filling up whole screen Set to 0,0..1,1" - I tried, but have not found clear answer.
Anyway, I'm sure that this is viewport configuration corruption issue. Why it occurs? Don't know, as I don't know your workflow with this file.

Maxim

[insanoff · Accepted solution]

Just copied and paste content from source file to new file. And it works!

Thank you Maxim!