AutoCAD Structural Detailing General

Reply
Active Member
mclarenforever
Posts: 6
Registered: ‎08-12-2011
Message 1 of 7 (617 Views)

Table in template

617 Views, 6 Replies
02-18-2013 06:00 AM

Is possible to put a table in template when we create a automatic drawings with selected option (mode) Many Positions for some plates..?

I have seen that for an assembly with option Assembly and parts is possible to put the table in it.

 

Thank You.1.PNG2.PNG.! 

Product Support
Jakub.Brozonowicz
Posts: 317
Registered: ‎12-13-2010
Message 2 of 7 (606 Views)

Re: Table in template

02-18-2013 07:20 AM in reply to: mclarenforever

Looks like not possible.

Added to wishlist.



Jakub Brożonowicz
Mentor
StefanoPasquini6790
Posts: 190
Registered: ‎07-06-2011
Message 3 of 7 (586 Views)

Re: Table in template

02-19-2013 09:03 AM in reply to: Jakub.Brozonowicz

Hi,

 

you can made it manually, using the table command after the automatic generation of drawing and selecting ("L" option) the views of the position that you want include in the table.

 

Greetings

PasProStudio
Structural + Detailing engineers
Active Member
mclarenforever
Posts: 6
Registered: ‎08-12-2011
Message 4 of 7 (581 Views)

Re: Table in template

02-19-2013 09:32 AM in reply to: mclarenforever
Thank you Jakub..! ( I wish )

Thank you Stefano..!
What do you mean with "L" option.?
Mentor
StefanoPasquini6790
Posts: 190
Registered: ‎07-06-2011
Message 5 of 7 (570 Views)

Re: Table in template

02-19-2013 10:07 AM in reply to: mclarenforever

Well, this is the procedure to insert a table in a many positions automatic created detail (plate, profile or subassembly is the same!).

1) You have to create an automatic drawing with many position (you do it well!);

 

2) After creation, you have a drawing like this:

automatic drawing.jpg

 

3) Now, you have to select the "table command", in this case for plate, but you can use each type of table for each type of drawing (see picture below)

table creation.jpg

 

4) When you use this command in the layout tab, you can chose differtent element to be tabled: selected view, all or structure, you can select the "L" (in italian) option and select the plate that you want in the table (see the picture below)

L command.jpg

 

And this is the final result, very easy and quick:

 

Automati drawing with manual table.JPG

 

Greetings 

 

 

 

 

PasProStudio
Structural + Detailing engineers
Active Member
mclarenforever
Posts: 6
Registered: ‎08-12-2011
Message 6 of 7 (559 Views)

Re: Table in template

02-19-2013 11:05 PM in reply to: mclarenforever
Thank you Stefano.!
Now is very clear.
Product Support
Jakub.Brozonowicz
Posts: 317
Registered: ‎12-13-2010
Message 7 of 7 (552 Views)

Re: Table in template

02-20-2013 02:07 AM in reply to: mclarenforever

Yes, only adding the table after the drawing generation.

Unfortunately auto-placing table not works for such action.



Jakub Brożonowicz

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD Structural Detailing Category!

The AutoCAD Structural Detailing forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.

Ask the Community