AutoCAD Structural Detailing General

Reply
Valued Contributor
Posts: 56
Registered: ‎06-26-2012
Message 1 of 5 (816 Views)
Accepted Solution

Reinforcement length in ASD 2013

816 Views, 4 Replies
10-25-2012 06:33 AM

Please help!

I want to change the maximum length of the rebar from 12m to 11.7m:

when I use command Reinforecment Elevation and try to set a single bar with a length of 40m (or smth like that) I am dealing with a dilemma: ASD tries to cut it in bars with 12m each.

Product Support
Jakub.Brozonowicz
Posts: 314
Registered: ‎12-13-2010
Message 2 of 5 (806 Views)

Re: Reinforcement length in ASD 2013

10-25-2012 08:28 AM in reply to: Ievgen

MaxLength value in bar_??? database is set on 12.

(C:\ProgramData\Autodesk\Structural\Common Data\2013\Data\Reinf)

 



Jakub Brożonowicz
Valued Contributor
Posts: 56
Registered: ‎06-26-2012
Message 3 of 5 (803 Views)

Re: Reinforcement length in ASD 2013

10-25-2012 08:40 AM in reply to: Jakub.Brozonowicz

please specify what exact parameter I need to change. Is it possible to change with the ASD interface? 

Product Support
Jakub.Brozonowicz
Posts: 314
Registered: ‎12-13-2010
Message 4 of 5 (782 Views)

Re: Reinforcement length in ASD 2013

10-26-2012 03:25 AM in reply to: Ievgen

On interface you can only steer one bar only by MOD_BAR_LAP (Lap splices in Modify).

In database it is up to the diameter bar so many of MaxLength to change is needed.

 



Jakub Brożonowicz
New Member
Posts: 1
Registered: ‎04-11-2013
Message 5 of 5 (275 Views)

Re: Reinforcement length in ASD 2013

04-11-2013 06:56 AM in reply to: Jakub.Brozonowicz

I want to change the max length to 6m. but it can't be done in the interface as mentioned above. couldn't either edit the source cords. pls clearly mention what should I do?

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you interested in helping shape the Autodesk Community?
We’re looking at a few different ways to improve the “All Forums” landing page and need your feedback! If interested, please take a few minutes to fill out the following Usability Study. Thank you for your time!

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD Structural Detailing Category!

The AutoCAD Structural Detailing forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.

Ask the Community