AutoCAD Structural Detailing General DIscussion

AutoCAD Structural Detailing General DIscussion

Reply
Valued Contributor
Priitl220
Posts: 87
Registered: ‎05-23-2007
Message 1 of 8 (596 Views)
Accepted Solution

Opening ASD 2010 Steel drawing with ASD 2013 - Fatal error

596 Views, 7 Replies
12-17-2012 12:39 AM

Should I be able to open ASD 2010 steel drawing with ASD 2013 version?

____________________________________________
If you find my post useful give me Kudos. Thank you!
If my post solved your problem, accept it as a solution.
Valued Contributor
lucis29
Posts: 69
Registered: ‎03-04-2010
Message 2 of 8 (591 Views)

Re: Opening ASD 2010 Steel drawing with ASD 2013 - Fatal error

12-17-2012 01:13 AM in reply to: Priitl220

Of course. The other way arround is not possible.

Valued Contributor
Priitl220
Posts: 87
Registered: ‎05-23-2007
Message 3 of 8 (587 Views)

Re: Opening ASD 2010 Steel drawing with ASD 2013 - Fatal error

12-17-2012 01:30 AM in reply to: lucis29

Have you tried it yourself?

 

For me it causes fatal error.  I have tired with two different drawings.

 

I can not post the drawings, as they contain sensitive information.

 

And I cannot produce any other sample file, as I do not have ASD 2010 installed.

 


P.S. The other way around .... was not the question.

 

 

____________________________________________
If you find my post useful give me Kudos. Thank you!
If my post solved your problem, accept it as a solution.
Product Support
Jakub.Brozonowicz
Posts: 317
Registered: ‎12-13-2010
Message 4 of 8 (574 Views)

Re: Opening ASD 2010 Steel drawing with ASD 2013 - Fatal error

12-17-2012 03:57 AM in reply to: Priitl220

I think sometimes it happens but please try to share the file.

We have abilities to check it closer and possibly fix.

BTW is 2010 version file saved on priintout or model tab?



Jakub Brożonowicz
Valued Contributor
lucis29
Posts: 69
Registered: ‎03-04-2010
Message 5 of 8 (572 Views)

Re: Opening ASD 2010 Steel drawing with ASD 2013 - Fatal error

12-17-2012 04:00 AM in reply to: Priitl220

Yes. Off course I've tried. Otherwise I wouldn't have answered.

Try to open the back-up file. 

Product Support
Jakub.Brozonowicz
Posts: 317
Registered: ‎12-13-2010
Message 6 of 8 (525 Views)

Re: Opening ASD 2010 Steel drawing with ASD 2013 - Fatal error

12-20-2012 08:24 AM in reply to: lucis29

Finally it was solution by opening with recover in 2011 and saving there.

Next attempt of opening it in 2013 finishes successfully.

---------------------------------------------
If this post answer your question please click "Accept as Solution". It will help everyone to find answer more quickly!



Jakub Brożonowicz
Valued Contributor
lucis29
Posts: 69
Registered: ‎03-04-2010
Message 7 of 8 (500 Views)

Re: Opening ASD 2010 Steel drawing with ASD 2013 - Fatal error

12-21-2012 07:59 AM in reply to: Jakub.Brozonowicz
So, that means ASD2011 is the most stable and the best version? I still vote vor ASD2012 as beeing the best until now.
Product Support
Jakub.Brozonowicz
Posts: 317
Registered: ‎12-13-2010
Message 8 of 8 (496 Views)

Re: Opening ASD 2010 Steel drawing with ASD 2013 - Fatal error

12-21-2012 08:31 AM in reply to: lucis29

This solution accepted is just incidental - in such case only.

General conclusion about stability is rather unjustified.

But I can confirm that most of all examples are not easy to open in 2013.



Jakub Brożonowicz

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD Structural Detailing Category!

The AutoCAD Structural Detailing forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.

Ask the Community