AutoCAD Structural Detailing General

New Member
Posts: 1
Registered: ‎07-25-2012
Message 1 of 4 (473 Views)

Disappearing layout tabs. Lots of work lost!!

473 Views, 3 Replies
07-25-2012 06:32 AM

I have a major problem.


Whilst detailing the reinforcement on a number of precast units the majority of my layout tabs vanished!


I changed workspaces from my own custom setup to ASD Reinforcement to start detailing then 30+ layout tabs suddenly disappeared without a trace.


Any ideas what happened or where they might be?


Hopefully I can recover them from last nights back up - otherwise I have lost hours and hours of work!




Distinguished Contributor
Posts: 103
Registered: ‎11-02-2011
Message 2 of 4 (454 Views)

Re: Disappearing layout tabs. Lots of work lost!!

07-30-2012 07:17 AM in reply to: chris

In Object Inspector, Printous tab, see if the layouts are inactive. ASD has a limit of 5 printouts at the same time.


You can change that limit, but this is a different discussion.

Posts: 4
Registered: ‎07-23-2012
Message 3 of 4 (448 Views)

Re: Disappearing layout tabs. Lots of work lost!!

07-30-2012 09:00 PM in reply to: chris

Do you mean the paperspace tabs along the bottom? If so, type SETPBUF and change the number of allowed model tabs...I had this problem to. Also in the ob inspector you can click on the triangles.

Hope that helps, Lynley

Product Support
Posts: 461
Registered: ‎06-23-2008
Message 4 of 4 (442 Views)

Re: Disappearing layout tabs. Lots of work lost!!

07-31-2012 12:07 AM in reply to: lynleyg

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Welcome to the new Autodesk Community!
If this is your first visit, click here to get started and make the most of the Community. Let us know what you think of the new experience in the Community Feedback Forum.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD Structural Detailing Category!

The AutoCAD Structural Detailing forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.

Ask the Community