AutoCAD Raster Design General Discussion

Reply
Valued Contributor
Daniel248
Posts: 50
Registered: ‎04-15-2011
Message 1 of 8 (3,412 Views)
Accepted Solution

Raster design 2014 - cannot find DLL

3412 Views, 7 Replies
04-22-2013 10:49 AM

I've just installed this, and found that none of the tools in the  Raster Tools tab work. All fail with a missind DLL (or other file that is needed) error.

The image in the attached screensot has been inserted as a reference, with ATTACH.

OS: Windows 7-64

 

Any ideeas?

Member
benh
Posts: 5
Registered: ‎09-24-2012
Message 2 of 8 (3,382 Views)

Re: Raster design 2014 - cannot find DLL

04-24-2013 11:26 AM in reply to: Daniel248
Same here
Member
benh
Posts: 5
Registered: ‎09-24-2012
Message 3 of 8 (3,379 Views)

Re: Raster design 2014 - cannot find DLL

04-24-2013 11:36 AM in reply to: Daniel248
Did you migrate settings from an earlier install? I searched some more and found a post from a few years ago where someone changed back to the vanilla user profile and it worked. I just did the same and can confirm success. l Let me know if it works for you.
Valued Contributor
Daniel248
Posts: 50
Registered: ‎04-15-2011
Message 4 of 8 (3,373 Views)

Re: Raster design 2014 - cannot find DLL

04-24-2013 01:10 PM in reply to: Daniel248

No migration here. Setting Vanilla current did not work.

I've looked in the loaded apps list and  aeciibui57.arx  was not loaded. When I tried to loaded manually it failed.

(screenshot attached)

I guess it's time to log a support request for this.

 

Thanks benh

Member
Cadguy68
Posts: 3
Registered: ‎03-31-2008
Message 5 of 8 (3,365 Views)

Re: Raster design 2014 - cannot find DLL

04-25-2013 03:29 AM in reply to: Daniel248

Hi,

 

I had a similar problem if you try and add the two raster paths to support files (Shown on the attached file) you may find that solves your problem.

 

Regards

Paul

Valued Contributor
Daniel248
Posts: 50
Registered: ‎04-15-2011
Message 6 of 8 (3,359 Views)

Re: Raster design 2014 - cannot find DLL

04-25-2013 04:28 AM in reply to: Daniel248

Adding the two raster paths to support files worked.

Thank you cadguy68

Distinguished Contributor
snakerancher
Posts: 212
Registered: ‎02-14-2008
Message 7 of 8 (3,037 Views)

Re: Raster design 2014 - cannot find DLL

06-06-2013 05:18 AM in reply to: Cadguy68

Spent many minutes/hours trying to get vanilla AutoCAD to load Raster on demand with no solution. I remember this happening with past versions as well. This is the first time I've found a solution that WORKED!

Thank you so much for the help.

 

Brian

*Expert Elite*
MariaManuela
Posts: 864
Registered: ‎12-04-2003
Message 8 of 8 (2,820 Views)

Re: Raster design 2014 - cannot find DLL

07-08-2013 03:35 AM in reply to: Cadguy68
Nice! Solve the the problem. Thanks
Maria Manuela Pinho
Application Specialist
Cadtech / Asidek - Autodesk Gold Partner
Autodesk Inventor Professional 2015 | Lenovo W520

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD Raster Design Category!

The AutoCAD Raster Design forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.

Ask the Community