AutoCAD Raster Design General

Reply
Active Contributor
Posts: 46
Registered: ‎04-13-2006
Message 1 of 3 (145 Views)

How to enhance/clean up an image using image processing menu

145 Views, 2 Replies
04-03-2008 01:51 PM
Hello everyone,

I am new at using Raster Design. I tried to use the Image Processing tools to enhance/clean the appearance of this image but failed miserably.

Would someone here please explain to me how to do it? Your help would be greatly appreciated!

I am attaching an example of some of the images here:
*Phil Daley
Message 2 of 3 (143 Views)

Re: How to enhance/clean up an image using image processing menu

04-07-2008 04:45 AM in reply to: Saturnina
On Thu, 3 Apr 2008 20:51:05 +0000, Saturnina <> wrote:

>Hello everyone,
>
>I am new at using Raster Design. I tried to use the Image Processing tools to enhance/clean the appearance of this image but failed miserably.
>
>Would someone here please explain to me how to do it? Your help would be greatly appreciated!
>
>I am attaching an example of some of the images here:

I am not sure what you want to do.

I think you need to run IDEPTH and convert the image to bitonal.

Then run idespeckle or other cleanup tools.

Phil Daley
Active Contributor
Posts: 46
Registered: ‎04-13-2006
Message 3 of 3 (143 Views)

Re: How to enhance/clean up an image using image processing menu

04-12-2008 04:18 PM in reply to: Saturnina
Thanks Phil.

I will try to do that.

On another topic... Do you know how to increase the image memory? Mine is stuck on 50 MG.

Thanks a million!

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Welcome to the new Autodesk Community!
If this is your first visit, click here to get started and make the most of the Community. Let us know what you think of the new experience in the Community Feedback Forum.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD Raster Design Category!

The AutoCAD Raster Design forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.

Ask the Community