AutoCAD Plant 3D

[#1]

Hi I was just wondering if anyone could help me, we have several cases on site where a sloped pipe goes directly in to a slip on flange. Is there a built in tolerence of how much of a angle the pipe can be before it can be connected direct to the pipe and can this angle be altered?

thanks

[#2]

Hi,

You can edit the tolerance for your joint in the DefaultConnectorsConfig.xml that is located in the root folder of the project.

This is a section for the connection that you need to edit:

<SlopeTolerance>3</SlopeTolerance>

Thanks,

Dan

[#3]

Hi Dan,

I’m sorry to say your answer not sufficient to me please can be more detail with screen snapshot

Thanks,

Ahmed Helal

[#4]

Hi,

I have attached a screen shot from the DefaultConncetorsConfig.xml below:

You need to edit the SlopeTolerance to the required angle.

Thanks,

Dan

[#5]

Thanks For all of you

Regards,

Ahmed Helal

[#6]

Hi Dan, I have tried this and I still cannot connect to the flange.

I have a funny feeling though that my project is looking at the wrong DefaultConncetorsConfig.xml file. Is there a way to check if the path to this is correct?

I have changed the tolerance to 5% perhaps this is to much?

Thanks

Mathew