when I use _.plantpipeadd I can draw a line between fittings with a difference of 0.0001 mm for example. (Where these differences come from I'm wondering every time)
When I try to connect two parts with the same difference using plantconnectjoint, it does not work.
So I have to delete the pipe and insert it again... :-(
What is to do?
I too need solution for this, even 0.5mm difference causing pipe and fitting disconnection. Where to set the tolerence?
I have been waiting for reply from Autodesk PPl, but asusual no reply.
We need more interaction from Autodesk ppl also here, if you find only users are sharing their views.
If you want to develop the software, please keep interacting here.
You'll need to play with th joint settings in the DefaultConnectorsConfig.xml in the project folder. Each joint has an Offset and Slope tolerance. You can play with these values and see if it clears up your issues.
As Dave said: Can you send us the connectors config file? Also the information what kind of joint you have used?
Sorry for my late reply here. Attached the requested file.
The joint connection tolerance required is for Buttweld.
I tried, but it is not getting connected.
Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register
Start with some of our most frequented solutions to get help installing your software.
|AutoCAD Land Desktop|
|AutoCAD Plant 3D|
|AutoCAD Raster Design|
|AutoCAD Structural Detailing|