I got a very strange promblem when creating Iso.There is a picture to show that.
Look at the picture,the piping is broken.Of course,I got not only one Iso dwg.Some were correct,some broken.
So I upload the *.pcf file as an attachment to search for that if anyone can slove this problem.You can download the attachment and change the extension to pcf.
By the way,this is a migration project since the Plant 3D 2012,and the isometric is 2013.
I couldn't uploaded the model as attachemts because of the file size.So can you give me your email,please?
The model is so big that I can't post on the discussion groups.So I uploaded that to esnips.com.
The 3DModel.dwg is the model drawing,and the Spec_Sheets is a zip file.There are lots of pipings,you can only creat iso using line number BFW 0520-150 R3B.
The model was designed in plant 3d 2012,and I want to creat the iso in plant 3d 2013.
You can download them from the follow website.
I got your email and had a look, and replied also. I will respond here in case anyone else is having the same issue.
I traced the centreline and re-run the line your spec, and the Isometric works fine. I created a new blank metric project, and left the Isometric Styles as is from the default styles.
I suspect the issue is in the line in the model somewhere, considering it works fine with my traced centre line, and your spec works fine, but my line works and yours doesn't.
I did notice there is a valve missing in the line, I froze the rest of the line numbers and left the problematic line ON. The check valve shows it as being the right line number, but when you freeze the whole model, the check valve disappears. Can you confirm the layering is correct?
I would look at tracing the centre line and re-run the Iso again. Its worked for me, I just am unsure of how it was modelled and where the issue might be.
Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register
Start with some of our most frequented solutions to get help installing your software.
|AutoCAD Land Desktop|
|AutoCAD Plant 3D|
|AutoCAD Raster Design|
|AutoCAD Structural Detailing|