AutoCAD Plant 3D Forum
Welcome to Autodesk’s AutoCAD Plant 3D Forums. Share your knowledge, ask questions, and explore popular AutoCAD Plant 3D topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Wye Tee Iso

2 REPLIES 2
Reply
Message 1 of 3
richard.imrie
700 Views, 2 Replies

Wye Tee Iso

Having a bit of bother with a custom symbol for wye tees. I have created the block and all ports align with their respective ports on the iso, however one leg of the tee doesn't seem to strech to meet the port. See below clips of my block configuration and my output iso. Any suggestions?Wyeblock.png

 

wyeiso.png

Tags (1)
2 REPLIES 2
Message 2 of 3
Dan.Scales
in reply to: richard.imrie

Hi,

 

Could you test with Extension 1 loaded and let me know the result?

 

If the problem still occurs try using the standard Tee isometric symbol.

 

Thanks,

Dan



Dan Scales
Message 3 of 3
richard.imrie
in reply to: Dan.Scales

Spoiler
 

Dan,

 

I have extension 1 installed on my machine already. The problem you are seeing is iso's produced with the most up-to-date version of Plant.

 

I have also used the normal tee block to produce the wye symbol with no luck.

 

Furthermore, i found that a hotfix was released for 2013 to correct wye's on isometrics.Maybe this hasn't been brought forward to 2014?

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report

”Boost