AutoCAD Plant 3D General

Reply
Active Member
axeborn
Posts: 10
Registered: ‎10-24-2012
Message 1 of 4 (462 Views)
Accepted Solution

Project Settings in Plant 3D using Vault

462 Views, 3 Replies
03-04-2013 02:08 AM

Hello,

 

We have just started a pilot project using vault functionality in Plant 3D.

Project setup works just fine and so does syncronizaion and check in/out for dwgs.

 

We have now hit a problem - when trying to change Tag Format on eg. Equipment.

Following thet needed steps - checking out the Project Settings from Vault and checking in after modifying Tag Format seems to work. But when opening Project Settings again - the changes are not there!

 

For information changing for example Project Description works.

 

The project is empty with default settings and full admin rights to Vault.

 

 

Anyone have a suggestion?

 

Thanks

 

Active Member
axeborn
Posts: 10
Registered: ‎10-24-2012
Message 2 of 4 (440 Views)

Re: Project Settings in Plant 3D using Vault

03-04-2013 07:41 AM in reply to: axeborn

I share the answer from Autodesk Subscription Support - which works just fine!

 

You should be able to workaround this issue by clicking another button in the dialog such as "Edit Block" before clicking OK and closing the project setup.

 

Now Vault understands that something is modified.

Employee
JarrodMudford
Posts: 49
Registered: ‎09-05-2012
Message 3 of 4 (371 Views)

Re: Project Settings in Plant 3D using Vault

03-07-2013 04:55 PM in reply to: axeborn

This issue is not Vault related. It is ONLY related to the Extension 1 version of Plant3D 2013. Even if you create a project outside of the Vault, that issue still arises.

If my post answers your question, please mark it as an Accepted Solution, so that others can find answers quickly!



Jarrod Mudford
Plant Solutions Consultant
Global Services
Autodesk, Inc.
Active Member
axeborn
Posts: 10
Registered: ‎10-24-2012
Message 4 of 4 (360 Views)

Re: Project Settings in Plant 3D using Vault

03-07-2013 11:08 PM in reply to: JarrodMudford

Thanks Jarrod for your clarification!

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD Plant 3D Category!

The AutoCAD Plant 3D forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.

Ask the Community