AutoCAD Plant 3D General

Reply
Active Member
mauro.cabano
Posts: 7
Registered: ‎12-19-2013
Message 11 of 16 (223 Views)

Re: Problems with isos dimensions settings

01-03-2014 09:34 AM in reply to: mauro.cabano
The locating dimension on support doesn't want to appear at all!!!!!!!!!!
Mentor
jabowabo
Posts: 175
Registered: ‎07-04-2013
Message 12 of 16 (216 Views)

Re: Problems with isos dimensions settings

01-03-2014 10:13 AM in reply to: mauro.cabano

At this point it might be best to .zip up your iso style folder along with a small drawing. Someone here may be able to analyze it quicker that way.

Active Contributor
richard.imrie
Posts: 29
Registered: ‎11-14-2012
Message 13 of 16 (199 Views)

Re: Problems with isos dimensions settings

01-06-2014 06:18 AM in reply to: mauro.cabano

You are only looking at 'default' dimension style. The top right of your clip which you attached to a previous comment, if you drop down that menu and look at the dimension styles for small bore pipe, existing etc etc.

Product Support
gersteb
Posts: 160
Registered: ‎09-20-2010
Message 14 of 16 (187 Views)

Re: Problems with isos dimensions settings

01-07-2014 12:26 AM in reply to: mauro.cabano
Hi Mauro, I have noted that you are using pipes with sizes of 50 and 20. By default all pipes which have sizes of 50 or less will be handled by the Small Bore Piping theme (see attached snapshot). So you have to switch from the Default theme to the Small Bore Piping theme on the top right of the frame in the configuration node 'Isometric DWG Settings - Dimensions'. Now you can do the changes as described above. Regards


Bernd Gerstenberger
New Member
issam12
Posts: 2
Registered: ‎02-04-2013
Message 15 of 16 (177 Views)

Re: Problems with isos dimensions settings

01-07-2014 04:49 AM in reply to: mauro.cabano

try this setting for smallboreUntitled.jpg

Active Member
mauro.cabano
Posts: 7
Registered: ‎12-19-2013
Message 16 of 16 (128 Views)

Re: Problems with isos dimensions settings

01-29-2014 02:45 AM in reply to: mauro.cabano

Thank You all!!!!!

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD Plant 3D Category!

The AutoCAD Plant 3D forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.

Ask the Community