AutoCAD Plant 3D General DIscussion

Reply
Active Contributor
SamScopeo
Posts: 32
Registered: ‎08-17-2012
Message 1 of 5 (495 Views)

P3D 2013 isometrics PIPELINE-REFERENCE field

495 Views, 4 Replies
09-04-2012 04:19 AM

Hi,

Sea attached a sample.

My P3dLineGroup.tag is 80 P 80032 A2.

When i generate isometric and PCF file, the name of PCF file is correct, but inside PCF file the PIPELINE-REFERENCE take the value "80 P 80032 A2-2". From where P3D add the "-2" ??

The consequences are that on iso line tags this "-2" appear too ! (because isoconfig.xml use the PIPELINE-REFERENCE field)

So :

How the PIPELINE-REFERENCE field is generate from model to PCF file ?  (I did found that in isoconfig.xml)

Where does the index "-2" at the end of the number ?

 

Regards

 

Sam

Product Support
gersteb
Posts: 165
Registered: ‎09-20-2010
Message 2 of 5 (446 Views)

Re: P3D 2013 isometrics PIPELINE-REFERENCE field

09-07-2012 02:23 AM in reply to: SamScopeo

Hi Sam,

 

The 2 after your user-defined tag is a reference numbe to the splittet isometric drawing. See attached picture. If your isometric will be splittet in two drawings 80 P 80032 A2-1 and 80 P 80032 A2-2.

 

Regards

Bernd



Bernd Gerstenberger
Active Contributor
SamScopeo
Posts: 32
Registered: ‎08-17-2012
Message 3 of 5 (437 Views)

Re: P3D 2013 isometrics PIPELINE-REFERENCE field

09-07-2012 02:51 AM in reply to: gersteb

Hi Bernd,

 

True the iso spleeted have an indice added in dwg name and file name. I get it.

 

But there is only one PCF file and only one PIPELINE-REFERENCE per line (even if it's iso is spleeted)

 

So sorry but it is not normal to have this indice in PIPELINE-REFERENCE of PCF file :smileysad:

 

 

Regards

 

Sam

Active Contributor
SamScopeo
Posts: 32
Registered: ‎08-17-2012
Message 4 of 5 (435 Views)

Re: P3D 2013 isometrics PIPELINE-REFERENCE field

09-07-2012 04:07 AM in reply to: gersteb

Hi Bernd

 

See attached, even if the iso is not splited, this indice appear ...

 

Sam

Product Support
gersteb
Posts: 165
Registered: ‎09-20-2010
Message 5 of 5 (427 Views)

Re: P3D 2013 isometrics PIPELINE-REFERENCE field

09-07-2012 05:17 AM in reply to: SamScopeo

This is strange. I can not recreate it here. I tried also to migrate a 2012 project to a 2013 project. But get no added number at the end of the tag as you get when isometrics are not splitted. I will send you via email a ftp-link there you can upload your project.



Bernd Gerstenberger

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD Plant 3D Category!

The AutoCAD Plant 3D forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.

Ask the Community