AutoCAD Plant 3D General

Reply
Valued Contributor
vannmannen
Posts: 57
Registered: ‎12-16-2011
Message 1 of 3 (1,399 Views)
Accepted Solution

Isometric comes out with BLUE text font

1399 Views, 2 Replies
11-05-2012 09:55 PM

Even if I try to print with monorcome both to pdf and to paper, I get blue font on the BOM, CUT & WELD list.

I can not find any way to chance this font into black in the project set-up and they come out as blocks on the isometric (which makes things time consuming for us) so we struggle to change it into black on the 2D drawing aswell.

Any help would be highly apprecieted.

 

See attachment.

Valued Contributor
phwatso
Posts: 60
Registered: ‎11-04-2010
Message 2 of 3 (1,384 Views)

Re: Isometric comes out with BLUE text font

11-06-2012 07:59 AM in reply to: vannmannen

Go to Project setup

Isometric DWG Settings

Title Block and Display

Setup Title Block

Click on BoM Table

Click on Gray area around table at top left

Right click grey square

Locking -> Unlocked

Right click grey square

Properties -> Text Color change to prefered colour

 

Save changes....

 

 

Valued Contributor
vannmannen
Posts: 57
Registered: ‎12-16-2011
Message 3 of 3 (1,372 Views)

Re: Isometric comes out with BLUE text font

11-06-2012 04:40 PM in reply to: phwatso

Fantastic. That solved it all !!!

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD Plant 3D Category!

The AutoCAD Plant 3D forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.

Ask the Community