Imperial to Metric connection 2014

[alvaro.nimasco]

Hi,

after enable "This joint connects imperial to metric components", I can't connect imperial to metric and also can't connect metric to metric nor imperial to imperial which I could before enabling. In 2013 version, didn't have this issue. 

The imgs show a SW example trying to connect a PL pipe

thanks

[alvaro.nimasco]

So, nothing to do here ?!

tough for releasing isometrics

regards

[AndyDavisCadline]

Hi,

In 2014 the joint settings have changed slightly. 

You now need to create a specific connection for each joint to indicate whether it is imperial-metric or not.  If you look at a default configuration, you will see that there is now a Buttweld Joint and a MixedButtweld Joint.  The checkbox in the user interface is now definitive – if it is ticked the joint is mixed only.

Therefore you need 2 different SW-PL joint settings, 1 mixed and the other not.

Hope this helps.

Regards,

Andy

[batone79]

I wanna say thanks to Autocad Plant 3d Developers to make my live better with this improve....

pufff...there are not things to change, you know? and touch that..

Bravo.!!!