I have some equipment in IGS extension. I can not convert perfectly to Plant 3D solids.
as can be done properly to avoid mistakes?
tengo unos equipos en extension IGS. No consigo convertirlo perfectamente a solidos para plant 3d.
como se puede hacer de manera adecuada para no tener errores?
Solved! Go to Solution.
Can what ever software you used to create the IGS file export to dwg? That would be your best option if you want to use something that has been built in another software.
This may also help.
If you have the model in dwg format, you can convert it into equipment.
Do those steps to import the igs-file into your Plant3D-projekt:
Let me know, if this helps.
Yes, my mistake, you would use the PLANTPARTCONVERT to create the valve.
Though, I don't recomend this because of the size of the file. It is nice to use components that are already created, but the high level of detail that is usually in those sorts of models will severly affect the performance of Plant. If there is a way for you to shrink wrap it (similar to what Inventor does) out of what ever software it was created in to reduce the file size, that would be highly recommended if you are dead set on using the valve, or just use the valves in the software and adjust it for the appropriate length.
You are right: this is a valve. Sorry for this misinformation.
So here are the steps for a valve:
Please, let me know if this helps.
Start with some of our most frequented solutions to get help installing your software.
The AutoCAD Plant 3D forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.
|AutoCAD Plant 3D General|