AutoCAD Plant 3D General

Reply
New Member
own_operate
Posts: 1
Registered: ‎09-04-2013
Message 1 of 1 (117 Views)

Defining standard fittings in pipe specs & replacing current fittings

117 Views, 0 Replies
09-05-2013 08:59 AM

2 issues: 

 

- how to set new standard fitting for a pipe spec (in this case, grooved class 300)

- how to replace all current fittings with custom fittings 

 

Here is an example of a 45 that I want to make the "standard" 45 for grooved spec.  Main difference is distance of pipe end separations.  Default grooved class 300 creates a 1/16" gap, which is fine for standard Gruv or Vic fittings, but new SlideLOK fittings have a range of 0-3/32".  The custom fittings I have yield a total separation of 1/16" (or 1/32" for each side). 

 

Example here:

 

SiVBwCG.jpg

 

Here is the system I am trying to replace all fittings in. Is there a way to just blanket replace all current 90 & 45 fittings (keeping orientation) with my own?

 

qWdnaRo.jpg

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD Plant 3D Category!

The AutoCAD Plant 3D forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.

Ask the Community