AutoCAD Plant 3D General

Reply
Contributor
Posts: 15
Registered: ‎07-14-2008
Message 1 of 6 (1,161 Views)
Accepted Solution

Concentric, Eccentric Reducers and Reducing Tees

1161 Views, 5 Replies
01-17-2012 09:48 AM

How do you input the data in the spec Editor 2012 to show the difference in schedule of pipe fittings.  For example, a concentric reducer 4" SCH 80 LE x SCH STD SE.

 

Thanks,

Alex Salcido

Contributor
Posts: 15
Registered: ‎07-14-2008
Message 2 of 6 (1,117 Views)

Re: Concentric, Eccentric Reducers and Reducing Tees

01-24-2012 05:34 PM in reply to: asalcido

So does anyone have anything about this?

Product Support
jason.drew
Posts: 310
Registered: ‎06-17-2010
Message 3 of 6 (1,101 Views)

Re: Concentric, Eccentric Reducers and Reducing Tees

01-25-2012 03:56 PM in reply to: asalcido

Typically you would use the "Batch Assign Long Description Styles" function of Spec Editor to configure a new format or string for the properties you would need.

 

Batch_Assign_Desc_Styles.png

 

I attempted to configure the long description as you mentioned above. However, I wasn't able to use the size field for the second part of the string.

 

Edit_Long_Desc_Style_001.png

 

I am assuming you would want something similar to this for a reducer that changes in size and schedule (as an example):

 

4" SCH 80 LE x 6" SCH STD SE

 

Would be something like:

 

<Nominal Diameter>" SCH <Schedule> LE x <Nominal Diameter>" SCH <Schedule> SE

 

So there are two property fields for size and schedule in the spec, but the long description style editor only recognized the first entry for size and schedule. 

 

The workaround I tried was to create 4 new fields:

 

SIZE1

SIZE2

SCH1

SCH2

 

But unfortunately you cannot use custom property fields in the long descriptions. 

 

I have submitted this issue to the development team. 

 

Thank you,

 



Jason Drew
Premium Support Specialist
Product Support
Autodesk, Inc.





If my post answers your question, please click the "Accept as Solution" button. This helps everyone find answers more quickly.
Contributor
Posts: 15
Registered: ‎07-14-2008
Message 4 of 6 (1,095 Views)

Re: Concentric, Eccentric Reducers and Reducing Tees

01-25-2012 04:51 PM in reply to: jason.drew

Thanks Jason.  Just wanted to make sure I wasn't missing something.

dry
Active Member
Posts: 7
Registered: ‎09-11-2013
Message 5 of 6 (329 Views)

Re: Concentric, Eccentric Reducers and Reducing Tees

10-01-2013 07:14 AM in reply to: asalcido

Hello,

 

Does this issue been solved in PLANT 3D 2014?

 

So far I cannot find how to describe (using long description style manager) two-dimensional fittings such reducer or reducing tree. On iso drawing BOM there will be always first (larger) dimension parameters visible (i.e. wall thickness). It is very confusing.

 

Regards

Dominik Ryś

Employee
Posts: 282
Registered: ‎08-15-2007
Message 6 of 6 (279 Views)

Re: Concentric, Eccentric Reducers and Reducing Tees

10-07-2013 11:10 AM in reply to: dry

Does this utility from ECAD solve the problem:

http://apps.exchange.autodesk.com/PLNT3D/en/Detail/Index?id=appstore.exchange.autodesk.com%3apdoexte...



Peter Quinn
Senior Product Manager
Autodesk, Inc.

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Welcome to the new Autodesk Community!
If this is your first visit, click here to get started and make the most of the Community. Let us know what you think of the new experience in the Community Feedback Forum.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD Plant 3D Category!

The AutoCAD Plant 3D forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.

Ask the Community