AutoCAD Plant 3D General

Reply
Mentor
Ahmed1081975
Posts: 213
Registered: ‎09-29-2011
Message 1 of 17 (552 Views)

90 Degree Elbow Incorrect Showing in the ISO drawing

552 Views, 16 Replies
05-04-2013 03:02 AM

Hi Autodesk Support,

I have an issue for generating Isometric Drawings,

I have line with 90 degree elbow showing wrong direction

For more clarification Refer the attached file.

 

Regards,

 

Ahmed Helal

Distinguished Contributor
Arun_Kumar_K
Posts: 419
Registered: ‎06-03-2012
Message 2 of 17 (543 Views)

Re: 90 Degree Elbow Incorrect Showing in the ISO drawing

05-04-2013 08:54 AM in reply to: Ahmed1081975
It's with 2014 or 2013
Mentor
Ahmed1081975
Posts: 213
Registered: ‎09-29-2011
Message 3 of 17 (533 Views)

Re: 90 Degree Elbow Incorrect Showing in the ISO drawing

05-04-2013 10:24 AM in reply to: Arun_Kumar_K

Both versions

Active Contributor
mikael
Posts: 41
Registered: ‎01-22-2013
Message 4 of 17 (506 Views)

Re: 90 Degree Elbow Incorrect Showing in the ISO drawing

05-05-2013 11:52 PM in reply to: Ahmed1081975

Hi,

 

Isn't it supposed to run from North to South?

 

 

//Mikael

Mentor
Ahmed1081975
Posts: 213
Registered: ‎09-29-2011
Message 5 of 17 (503 Views)

Re: 90 Degree Elbow Incorrect Showing in the ISO drawing

05-05-2013 11:59 PM in reply to: mikael

This not my issue my issue the Elbow in the Isometric Shown Wrong in the Drawing

 

Regards,

 

Ahmed Helal

Distinguished Contributor
Arun_Kumar_K
Posts: 419
Registered: ‎06-03-2012
Message 6 of 17 (486 Views)

Re: 90 Degree Elbow Incorrect Showing in the ISO drawing

05-06-2013 08:54 AM in reply to: Ahmed1081975
If you save the drawing in 2013 to 2010, then if u open in plain autocad 2010 only this issue will come, wat u do, open the drawing in plain autocad 2013 then save in 2010, u won't face problem.
Mentor
Ahmed1081975
Posts: 213
Registered: ‎09-29-2011
Message 7 of 17 (480 Views)

Re: 90 Degree Elbow Incorrect Showing in the ISO drawing

05-06-2013 09:19 AM in reply to: Arun_Kumar_K

Thanks for Your Reply, my default Setting is saving drawing in 2010

Regards,

Ahmed Helal

 

Valued Contributor
batone79
Posts: 68
Registered: ‎05-30-2006
Message 8 of 17 (467 Views)

Re: 90 Degree Elbow Incorrect Showing in the ISO drawing

05-07-2013 04:47 AM in reply to: Ahmed1081975

Check your Isometric Symbol (Acad Block) From your Project Setup.

 

Should be something like this.

 

Sin título-1.jpg

Mentor
Ahmed1081975
Posts: 213
Registered: ‎09-29-2011
Message 9 of 17 (457 Views)

Re: 90 Degree Elbow Incorrect Showing in the ISO drawing

05-07-2013 05:08 AM in reply to: batone79

 

Thanks Very Much For your Reply, the point is coming some places with correct direction and another places incorrect

This not solve the problem the problem in the Isometric.XML fine but where I can't find

 

Regards,

 

Ahmed Helal

 

Distinguished Contributor
Arun_Kumar_K
Posts: 419
Registered: ‎06-03-2012
Message 10 of 17 (456 Views)

Re: 90 Degree Elbow Incorrect Showing in the ISO drawing

05-07-2013 08:40 AM in reply to: Ahmed1081975
Don't use weld gap, redraw the line without weld gap. Issue is there with use of weld gap in plant 3d, if it solves Pls. Let me know

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD Plant 3D Category!

The AutoCAD Plant 3D forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.

Ask the Community