AutoCAD Plant 3D General

Reply
*Expert Elite*
dave.wolfe
Posts: 643
Registered: ‎12-04-2009
Message 1 of 8 (705 Views)

2014 New Features

705 Views, 7 Replies
04-09-2013 06:05 AM

We have an article detailing some new features in 2014 with links to the new features list published in the help files.

 

http://www.pdoteam.com/2013/04/autocad-plant-3d-2014new-features/

Dave Wolfe
Isaiah 57:15

ECAD, Inc.
Tips and Tricks on our blog: Process Design, from the Outside

A P3D Authorized Reseller
Distinguished Contributor
Arun_Kumar_K
Posts: 405
Registered: ‎06-03-2012
Message 2 of 8 (638 Views)

Re: 2014 New Features

04-09-2013 09:49 PM in reply to: dave.wolfe

Any software can't be improved in a day, it will take time. I am happy with some good features they have come up with Orthographic.

 

Request Autodesk to seriously concentrate the following in 2015 relase 1. Spec driven P&ID, 2. Shape intelligent for RCC, cable tray and ducts, 3. Improvements in Isometric, 4. section box as like in Revit.The above will take the software into next level and It could compete with major software. in market.

 

Also, it will boost our day-to-day activities.

 

There are lot of advantages there, if P&ID is spec driven, if it is made, it can be user for Proposal stage also.

Valued Contributor
Posts: 68
Registered: ‎06-05-2008
Message 3 of 8 (523 Views)

Re: 2014 New Features

04-15-2013 01:17 PM in reply to: dave.wolfe
hi
there are a lot of problems in iso generation in 2013 now what are new features about that?
Distinguished Contributor
Arun_Kumar_K
Posts: 405
Registered: ‎06-03-2012
Message 4 of 8 (480 Views)

Re: 2014 New Features

04-16-2013 08:34 AM in reply to: dave.wolfe
I imagine there won't be much improvement on that front. You will find good improvement only in ortho. Autodesk might be overconfident with their Isometric engine, so not much development happened, in my opinion.
*Expert Elite*
dave.wolfe
Posts: 643
Registered: ‎12-04-2009
Message 5 of 8 (470 Views)

Re: 2014 New Features

04-16-2013 09:49 AM in reply to: Arun_Kumar_K

I'm pretty sure Autodesk knows where they stand on isometrics. I've heard there have been a lot of bug fixes, but I haven't been able to find any new features.  I personally have been involved in issue resolution with isometrics so I know they are aware of problems, but sometimes the solution is not simple.  IMO, the isometric structure and setup is well-defined, but as with any young product, it needs some more finishing work done.  I'm excited by the way they worked out the orthographic generation.

Dave Wolfe
Isaiah 57:15

ECAD, Inc.
Tips and Tricks on our blog: Process Design, from the Outside

A P3D Authorized Reseller
Distinguished Contributor
Arun_Kumar_K
Posts: 405
Registered: ‎06-03-2012
Message 6 of 8 (441 Views)

Re: 2014 New Features

04-17-2013 10:23 AM in reply to: dave.wolfe
Thanks for sharing your views. Hope to see great improvements in Isometric by 2015.
Valued Contributor
Posts: 68
Registered: ‎06-05-2008
Message 7 of 8 (423 Views)

Re: 2014 New Features

04-17-2013 12:44 PM in reply to: dave.wolfe

hi

we speak about a great company . we expect too more than this.I offer the people who post in wish list specify how many of their considration is involved in 2014.

It seems autodesk didn't spend enough time on new release and pay attention that this software is not too young . it is autocad based this means they don't need to change graphicaly directly.

I asked some question on iso creation and i found no answer even one ! it is very disappointing.

Distinguished Contributor
Arun_Kumar_K
Posts: 405
Registered: ‎06-03-2012
Message 8 of 8 (408 Views)

Re: 2014 New Features

04-17-2013 09:56 PM in reply to: dave.wolfe

Everyone who uses Plan3d, have the same frustration what you have. But we have to live with that. I don't have an idea, how Autodesk withdrawn Isogen without fully developed their isometric engine, as it is directly affecting their business. Be patient, let hope they will develop isometric engine by 2015 release. Otherwise there is no option, we should change the platform

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you interested in helping shape the Autodesk Community?
We’re looking at a few different ways to improve the “All Forums” landing page and need your feedback! If interested, please take a few minutes to fill out the following Usability Study. Thank you for your time!

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD Plant 3D Category!

The AutoCAD Plant 3D forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.

Ask the Community