关于AUTODESK PLANT 3D 2010阀杆库的意见

[skyxiaotuzhi]

你好：
PLANT 3D 2010 和 2011中自带的阀杆库中，大于14"的阀门自带的阀杆库，全是一个阀杆+个手轮，仿真度不高。大于14"的阀门应该配带有变速齿轮机构的阀杆，这方面CADWORX都做的比AUTODESK PLANT 3D都要好。请软件工程师尽快加入这类阀杆入库

[huge123]

OK, let me translate for him (her).

In the valve library, for 14” and larger valve, the operator is still hand wheel. Actually, for large valve, gear operated operator (hand wheel) is needed, and not available in the auto plant 2010. But this feature is available in Cadworx. Please add this in the new release. Edited by: huge123 on May 19, 2010 5:46 PM

[Anonymous]

Thanks. I tried google translate and I wasn't able to understand it.

This is a high priority enhancement that will be in a future release.

Peter Quinn (Autodesk)
wrote in message news:6393946@discussion.autodesk.com...
OK, let me translate for him (her).

In the valve library, for 14" and larger valve, the operator is still hand
wheel. Actually, for large valve, gear operated operator (hand wheel) is
needed, and not available in the auto plant 2010. But this feature is
available in Cadworx. Please add this in the new release.

Edited by: huge123 on May 19, 2010 5:46 PM