I'm having serious problems with these new OPCs. In P&ID 2013 you could pick the page and then the actual connector on that page to make a connection. With this new 2014 the software searches thru the drawings for a line to connect to for you. It's taking too long. It’s looking for a connection on its own. Which is really a problem for me because when I am finished with my project I will have approximately 1,200 drawings and who knows how many page connectors. I’m working in a refinery and am converting all our P&ID’s into AutoCAD P&ID. So this will end up being a huge project.
I try use the Plug-in but it does not work. I can get it to load and show in my ribbon, but when I click on it or type in "opcselect" it just says unknown command. I have clicked on the folder and unchecked read only. I have made sure the other thing you mentioned was set to 14, and I have ran the netload all with no success? Could you know what I am doing wrong?
Does this help?
Command: Cannot load assembly. Error details: System.IO.FileLoadException: Could not load file or assembly 'file:///C:\ProgramData\Autodesk\ApplicationPlugin
File name: 'file:///C:\ProgramData\Autodesk\ApplicationPlugin
at System.Reflection.Assembly.LoadFrom(String assemblyFile)
You probably need to right click on the zip file that you downloaded and then go to its properties and "unblock" it. Then try putting the files in the appropriate folder, close/re-open the program and it should work.
Hope this helps!
This is a serious bug that I reported a couple of months ago and we are in drastic need of a quick fix. How close is autodesk to releasing the hot fix?
Or alternatively, how do you connnect line numbers from one drawing to another without the OPC and without doing everyone manually because we have hundreds of drawings...
Can we please get a approximate timeline for a hotfix for this issue? I am in the middle of a major project with hundreds off connections to make - is it weeks or months?
This is a major flaw in the software - we need an update!!
From what I last heard from development back in July, an update for the OPCs won't likely be out any sooner than December. If not December, then likely it will come with the next release next April.
Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register
Start with some of our most frequented solutions to get help installing your software.
|AutoCAD Land Desktop|
|AutoCAD Plant 3D|
|AutoCAD Raster Design|
|AutoCAD Structural Detailing|
|Ecotect Analysis - Desktop Tools|
|Green Building Studio - Web-Based Service|
|Robot Structural Analysis|