AutoCAD P&ID

[#1]

Hello all,

We are experiencing some issues regarding bubble tags instrumentation. The problem is that the square around the mark that are supposed to be Hidden, in our design are not (SEE PID FIG 2 attached). We try to change the configuration of the bubble in a lot of different ways, but we were not successful. The PID FIG 1 attached is how we usually have our tags.

Thanks for any help you can provide,

Gustavo

[#2 · Accepted solution]

Make sure wipeout frame is set to off. Use wipeout command to set that

[#3]

That´s it. Thank you very much.