Is possible to get a fast answer for my following problem:
I create a new instrument bubble and bring it to Project Setup as any other custom symbol. I set the attachment points and the annotation format. I set the "Rotation on insert" to "Yes". I bring it to tool palet. I insert the bubble, gives me the posibility to rotate but when I release it comes to horizontal position.
I create an empty bubble (without any annotation) , follow same procedure as previous. I insert it and after releasing it everything is according to needed rotation angle.
I have attached the editor block view for the instrument what I use in my project. I suppose the problem cause is the too long annotation format. But this I can't change.
Is there anyone able to help me?
Thank you in advance
The way I did it, was to create a already rotated symbol and add it as a second symbol for your instrument.
Then you can place your instrument, do a right-click, and choose the rotated symbol.
I see this a 1,5 year old post...
Has annyone found a solution for this problem yet?
why is it always horizontal?
there should be an option to rotate it i guess??
Somethimes when an instrument is added, you just do not have enough space for it.. espacialy when you have "wide" instrumentsymbols with a 6 digits loopnumber...
Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register
Start with some of our most frequented solutions to get help installing your software.
The AutoCAD P&ID forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.
|AutoCAD P&ID General|