AutoCAD P&ID General

Reply
Active Member
cyklosarin
Posts: 6
Registered: ‎12-12-2012
Message 1 of 4 (478 Views)

End connection for fittings / piping specialty items in AutoCAD P&ID

478 Views, 3 Replies
02-04-2013 04:40 AM

Hello,

 

It is possible to create property for identify end connections (welded, flanged) for fittings / piping specialty items as for hand valves in AutoCAD P&ID? I need to showflanged steap traps and y-type strainer on P&ID. Thanks in advance

 

Regards

Valued Contributor
georgeendrulat
Posts: 72
Registered: ‎10-31-2011
Message 2 of 4 (468 Views)

Re: End connection for fittings / piping specialty items in AutoCAD P&ID

02-04-2013 07:01 AM in reply to: cyklosarin

I tried everything I could think of, and nothing worked.  If it were me: I'd utilize different graphical styles for the item itself to differentiate between end types and manually insert flanges when needed.  That's the best I could come up with.  I looked through the database itself to see where the system property "EndConnections" resided, no luck.  Tried to create it manually, but the list seems to be a secret.  Tried setting the speciality item symbol to auto-nozzle, that was a disaster. If you or anyone here figures it out, please post it.

Active Member
cyklosarin
Posts: 6
Registered: ‎12-12-2012
Message 3 of 4 (455 Views)

Re: End connection for fittings / piping specialty items in AutoCAD P&ID

02-04-2013 10:02 AM in reply to: cyklosarin

Thanks for the reply.

 

I Also tried to pick manually "EndConnectionts" property but without effect. I think it is somehow hardcoded by soft. For now the only way (beside what you wrote) is to pick such elements under "hand valves" & "instruments" category.

Valued Contributor
georgeendrulat
Posts: 72
Registered: ‎10-31-2011
Message 4 of 4 (449 Views)

Re: End connection for fittings / piping specialty items in AutoCAD P&ID

02-04-2013 10:59 AM in reply to: cyklosarin

That's something I didn't consider.  Re-create the items under handvalves.  That's a solution, all be it a not so great one, but it should work.  I'm going to test it some more.

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD P&ID Category!

The AutoCAD P&ID forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.

Ask the Community