AutoCAD Mechanical General

Reply
New Member
BigJake76
Posts: 1
Registered: ‎07-20-2009
Message 1 of 5 (156 Views)

REFEDIT & BEDIT are causing FATAL ERRORs

156 Views, 4 Replies
07-20-2009 12:37 PM
REFEDIT & BEDIT are both causing FATAL ERRORS when I try to use them. It happens right after I select my block to edit. My company just upgraded to Mechanical 2010. I did not ever have this problem before. PLEASE, somebody Help!!
Active Member
aloha_joy
Posts: 7
Registered: ‎04-29-2004
Message 2 of 5 (100 Views)

Re: REFEDIT & BEDIT are causing FATAL ERRORs

04-13-2012 02:26 PM in reply to: BigJake76

did this ever get solved for you?

I have had this same problem for YEARS!

for the first 18 months on ACAD 2011 no problems and in the past month it has happened at least a dozen times. I use this command multiple times every day.

Employee
michaelsu
Posts: 483
Registered: ‎07-11-2008
Message 3 of 5 (97 Views)

Re: REFEDIT & BEDIT are causing FATAL ERRORs

04-15-2012 08:00 PM in reply to: aloha_joy

Hi,

 

Does this issue still there after you patch the latest service pack?

 

If yes, can you please send your CER report when it crashed? Also, can you please send your drawing and reproducible steps to zhiyuan.su@autodesk.com?

Thanks.
Michael Su
SQA Engineer
Autodesk
------------------------------------------------------------------------------------------------------
Please mark any response as "Accept as Solution" if it answers your question.

Active Member
aloha_joy
Posts: 7
Registered: ‎04-29-2004
Message 4 of 5 (91 Views)

Re: REFEDIT & BEDIT are causing FATAL ERRORs

04-16-2012 08:16 AM in reply to: BigJake76

Michael-

 

Update 2 is installed and the communication center says I am up to date.

 

What is a CER report and how do I submit it? (I have filled out about 6 reports in the last month when I get the fatal error.)

 

Thanks
Joy 

Employee
michaelsu
Posts: 483
Registered: ‎07-11-2008
Message 5 of 5 (88 Views)

Re: REFEDIT & BEDIT are causing FATAL ERRORs

04-16-2012 07:48 PM in reply to: aloha_joy

 Hi Joy,

 

To send a CER report, you just need to fill in the email address and reproducible steps in the comment box of the dialog after you got a fatal error. Then click Ok button to send.

 

Please note that your email address and comments are important for us to analyze those issues. So it's highly recommended you fill it out in detail.

 

If possible, could you please send me or post your problematic drawing for further investigation?

Thanks.
Michael Su
SQA Engineer
Autodesk
------------------------------------------------------------------------------------------------------
Please mark any response as "Accept as Solution" if it answers your question.

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community