We use about 16 different ortho photos we use for maps. I have changed imageframe 0 1 2 and frame 0 1 2 3 in about every possible combination. The Tiff file will not show borders, but I can still select it and snap to it. I want the borders off I am using map 2012. Am I missing another variable? At one time the borders stayed off and I couldn't accidentally snap to the corners.
Solved! Go to Solution.
how did you reference the images? Via FDO or by MAPIINSERT?
Have you tried to run _AUDIT?
Have you installed RasterDesign?
- alfred -
I used Mapiinsert and I have run the audit with no errors. I have even tried it on several different computers. It used to work with earlier versions. Any other ideas?
I just checked the help file for "IMAGEFRAME" and it has a hyperlink to "FRAME" - Under "FRAME" it states that this variable overrides Imageframe, dwfframe......
setting FRAME to 0 doesn't change anything (for me) if I inserted the images via _MAPIINSERT.
But setting IMAGEFRAME to 0 solves it for me ... the frames disappear on the screen.
If you set FRAME to 2, then IMAGEFRAME to 0 (that was the exact order I used the command) what happens to your current or to a new drawing?
At least does it also be print the image-borders? Also if you set IMAGEFRAME to 2 where the frames should be displayed but not plotted?
- alfred -
what file-format do the images have?
I can't reproduce this problem (TIFF), sorry for the moment.
- alfred -
That's ok. Autodesk called me yesterday and I showed them the problem. Tried everything, still does not work. I just want the image to show up and not be able to select or snap to the image border. We use several ariel photo's each one is about 5 miles x 5 miles and I have to work in areas that are about 50 to 500 ft. It is just a pain when I am working on the edges of the images and it snaps 5 miles up, down, or anywhere. The best part is if I do an erase with a crossing and I just happen to select a border and I have to reload the ariel photo's. I do turn the osnaps off except when I am drawing along several polygons or topo lines that I need the osnaps. The older versions worked with imageframe set to 0 and frame to 0, It would not select or snap to any photo's edges. When I need to borders I used to just turn it back on (Imageframe 1).
Set IMAGEFRAME to 0 to turn the frames off
Set FRAMESELECTION to 0 to turn off the selection, otherwise you can still select the images with the frames turned off.
It should resolve your troubles
Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register
Start with some of our most frequented solutions to get help installing your software.