AutoCAD Map 3D General

Reply
Active Contributor
Posts: 41
Registered: ‎03-25-2008
Message 1 of 8 (937 Views)
Accepted Solution

WORLD UCS ROTATED

937 Views, 7 Replies
08-31-2012 08:36 AM

The World UCS seems to be rotated for some unknown reason.

If I change it to Plan view everything seems fine but it still bothers me.

I have not used dview twist; it is set to 0.

This seems to be an issue since I updated to Map3D 2013 64bit.

Is anyone else having this problem?

 

Thanks!

Alicia
*Expert Elite*
Alfred.NESWADBA
Posts: 8,578
Registered: ‎06-29-2007
Message 2 of 8 (935 Views)

Re: WORLD UCS ROTATED

08-31-2012 09:00 AM in reply to: amm30165

Hi,

 

>> The World UCS seems to be rotated for some unknown reason.

The WORLD coordinate-system within a drawing can't be rotated or modified in any way. Why do you think that it is rotated?

If you open a drawing in 2013 what is different to the previous AutoCAD Map3D you had?

 

- alfred -

-------------------------------------------------------------------------
Alfred NESWADBA
Ingenieur Studio HOLLAUS ... www.hollaus.at
-------------------------------------------------------------------------
Active Contributor
Posts: 41
Registered: ‎03-25-2008
Message 3 of 8 (934 Views)

Re: WORLD UCS ROTATED

08-31-2012 09:06 AM in reply to: Alfred.NESWADBA

The view cube in the upper right hand corner (with North, South, East and West) is not straight.; looks rotated about 10 degrees to the NE.

Alicia
*Expert Elite*
Alfred.NESWADBA
Posts: 8,578
Registered: ‎06-29-2007
Message 4 of 8 (931 Views)

Re: WORLD UCS ROTATED

08-31-2012 09:19 AM in reply to: amm30165

Hi,

 

if UCS is really set to WORLD, then your view is twisted, not the world-coord is rotated. It's just like you rotate your head, that does not rotate the world :smileywink: :smileywink:

Well, you said it, command _PLAN and option _WORLD and you look parallel to world ucs (north is up).

 

- alfred -

 

-------------------------------------------------------------------------
Alfred NESWADBA
Ingenieur Studio HOLLAUS ... www.hollaus.at
-------------------------------------------------------------------------
*Expert Elite*
antoniovinci
Posts: 1,498
Registered: ‎06-03-2011
Message 5 of 8 (924 Views)

Re: WORLD UCS ROTATED

08-31-2012 10:02 AM in reply to: Alfred.NESWADBA

Yep, or more simply: type in _UCS and double enter...

Active Contributor
Posts: 41
Registered: ‎03-25-2008
Message 6 of 8 (918 Views)

Re: WORLD UCS ROTATED

08-31-2012 10:30 AM in reply to: antoniovinci

I appreciate all of the replies.

 

I have been working with AutoCAD for 20+ years and have not experienced this before.

 

Maybe the attached png will help to explain my problem....

 

Why does the view cube look exactly the same in every drawing I open?

The ucs icon is squared up and not a named or object aligned ucs; the view has not been twisted.

My drawings did not look like this when they were saved to a version provious to 2013.

Did I unknowingly change a setting to something?

 

thanks,

Alicia
*Expert Elite*
Alfred.NESWADBA
Posts: 8,578
Registered: ‎06-29-2007
Message 7 of 8 (913 Views)

Re: WORLD UCS ROTATED

08-31-2012 10:40 AM in reply to: amm30165

Hi,

 

can you verify the sysvars

UCSFOLLOW (should be tried with 0)

if you start _GEOGRAPHICLOCATION ... are you asked for removing a geogr.position? If so answer with "remove" and look again to your drawing with _PLAN _WORLD or press onto "TOP" on your viewcube.

 

If none of these options work, please click on "TOP" and let us see the screenshot then.

 

- alfred -

-------------------------------------------------------------------------
Alfred NESWADBA
Ingenieur Studio HOLLAUS ... www.hollaus.at
-------------------------------------------------------------------------
Active Contributor
Posts: 41
Registered: ‎03-25-2008
Message 8 of 8 (910 Views)

Re: WORLD UCS ROTATED

08-31-2012 10:52 AM in reply to: Alfred.NESWADBA

Removing the current geographioclocation fixed the world UCS.  Everything is squared up again.

Thanks so much!!!

I appreciate your patience.

 

Alicia

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you interested in helping shape the Autodesk Community?
We’re looking at a few different ways to improve the “All Forums” landing page and need your feedback! If interested, please take a few minutes to fill out the following Usability Study. Thank you for your time!

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community