AutoCAD Map 3D General Discussion

Reply
Member
miner.details
Posts: 3
Registered: ‎08-04-2009
Message 1 of 2 (213 Views)
Accepted Solution

Transformation grid

213 Views, 1 Replies
12-02-2013 06:53 PM

I have a client who is working on the edge of a MGA coordinate zone - as they are near the edge of the zone their scale factor is large and needs to be factored in to all setouts (it makes 50mm of difference over 100 metres.)

their previous solution has been to work day to day at 1 to 1 scale and then xreference this back into a MGA projection by using a scale factor around a single point false origin.

As they are moving away from this false origin - the scale factor is changing slightly.

Is it possible to create a user grid at 1 to 1 for the day to day use and then query this into a MGA drawing. via ADEQUERY to bring it back to MGA ?

Product Support
lim.wendy
Posts: 60
Registered: ‎01-09-2012
Message 2 of 2 (172 Views)

Re: Transformation grid

12-08-2013 06:31 PM in reply to: miner.details

Hi!

May I know which version of Map3D are you using?
You can create a ‘user defined coordinate system’ based on 
the zone you are working – and then set the scale reduction factor to 1. 

When ADE-querying such a DWG in, the coordinates are 
re-projected into the target coordinate system that the host-DWG is using.

 

:smileyhappy:




Wendy Lim

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community