*Expert Elite*
Posts: 1,867
Registered: ‎11-13-2006
Message 21 of 25 (228 Views)

# Re: Tower and shed

09-05-2012 04:15 AM in reply to: bingeomatics

Binnat,

If you must use polygonal features then all you can do is use a fill style to show the "X" in the middle but as you found out its hard to get them to display the way you want. Now if I HAD to use polygonal features I would use them as a footprint of the tower but still use a point feature with symbols to display the configuration.

Murph
Supportting the troops daily.
Distinguished Contributor
Posts: 216
Registered: ‎04-29-2012
Message 22 of 25 (227 Views)

# Re: Tower and shed

09-05-2012 04:54 AM in reply to: parkr4st

Dave, I understand you. But nobody don't understand me. Problem in that in my objects must be vertex (or corner) and evry corner must be measured by surveyor, so it must be polygonal object like buildings.  In our country for topographical requirment shown that if edges of the object can shown in the scale of map, it must be drawn like a polygon. If it is so little, that his edges can't shown in the scale, it must be drawn as o point feature. That is why, an example, if the size of edges of the tower or shed or building are 5 m, for the map of scale 1:500 it must be drawn like a polygonal feature. If I want to creat a map in the scale 1:5000, then I must draw it (that object)  like a point feature. These rules remainted from the time USSR, when in our country created and used only maps on the hardcopy (not digital maps).

Binnat Khalilov
Valued Mentor
Posts: 376
Registered: ‎03-24-2004
Message 23 of 25 (225 Views)

# Re: Tower and shed

09-05-2012 05:51 AM in reply to: bingeomatics

break the rules

Distinguished Contributor
Posts: 216
Registered: ‎04-29-2012
Message 24 of 25 (218 Views)

# Re: Tower and shed

09-05-2012 06:15 AM in reply to: Murph

Murph, I wished to use only one feature for each objects like modern GIS rules. Now I understood that for our cartographic work I must use two feature to reperesent one object for matching our state rules.

For all I am very much obliged to you!

Binnat Khalilov
Distinguished Contributor
Posts: 216
Registered: ‎04-29-2012
Message 25 of 25 (217 Views)

# Re: Tower and shed

09-05-2012 06:17 AM in reply to: bingeomatics

parkr4st, thank you much, too....! But I can't break rules, until I wil creat rules myself.....

I live in Azerbaijan.....

Binnat Khalilov

### You are not logged in.

Announcements
Welcome to the new Autodesk Community!
If this is your first visit, click here to get started and make the most of the Community. Let us know what you think of the new experience in the Community Feedback Forum.