AutoCAD Map 3D General

Reply
Contributor
Posts: 13
Registered: ‎01-09-2007
Message 1 of 2 (148 Views)

Linetype changing scales

148 Views, 1 Replies
06-15-2012 02:48 AM

I am using Map 3D 2013

 

I have several drawings in which I want to use a linetype (centrex2) at a specific scale. The scale setting is exactly the same in all the drawings but in some the linetype is coming out at different scales, all larger, but not the same or to a set factor. All the entities in question are polylines (2d).

 

I have checked in all drawings that:

 

  • global scale factor and current object scale in the linetype manager are the same (1.0)
  • drawing units are the same (unitless)
  • ‘use paper space units for scaling’ is always deselected
  • linetype generation is always enabled

 

Any other suggestions gratefully received

Product Support
Posts: 564
Registered: ‎11-07-2007
Message 2 of 2 (116 Views)

Re: Linetype changing scales

06-19-2012 09:29 AM in reply to: GrahamSherwood6686

Hi Graham,

Do you mind sending a drawing that shows the issue?

Ideally, use eTransmit to create a pack of files that are used by this drawing (in case you are using a custon linetype).

 

Cheers,

Luciane

 

Luciane Conceição
Product Support Specialist
Autodesk, Inc.

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Welcome to the new Autodesk Community!
If this is your first visit, click here to get started and make the most of the Community. Let us know what you think of the new experience in the Community Feedback Forum.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community