The error suggests that the keys in your drawing do not have a matching
record in the linked table.
If the values used to generate links in the drawing look correct and should
have a matching record in the table try the following...
Check the keys to be sure there are no hidden characters...
trailing/preceding spaces?
Check the Link Template definition in this section drawing to be sure it
references the correct field type.
If you still have problems, try deleting this link template from the section
drawing and redefining it.
Good luck,
Will
"GIS" wrote in message
news:3C5EF470.BAF517AD@airstreamcomm.net...
> I will try to explain
>
> I recently got to examine some externally manufactured data. The
> original data had many link templates (to the same database) that had to
> be connected to our database. After attaching our database I queried
> all the drawings (36 sections) in one drawing. During the generation of
> links, 52 could not be generated. All occured in one sections. The
> keys and the data are correct. The original link template does work.
> Under DBconnect I tried synchronizing those links and I got a - link to
> nonexisting row- error.
> Any ideas,
> Thank you in advance
> if the problem is still unclear I will try to elaborate, but I am just
> confused about this.
>
> --
> Timothy Connet
> GIS Specialist
> Sawyer County Land Record Department
> 10610 Main Street - Courthouse
> P.O. Box 248
> Hayward, Wisconsin 54843-0248
> gis@sawyercountygov.org
> Office Phone Number (715) 634-3564
> Desk Phone Number (715) 638-3261
> Fax Number (715) 634-8185
>
>