Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
I believe I have a settings issue for which I am stumped- My polylines are visually appearing grey when I open just this one particular dwg. I have rechecked my layers and plot settings and all seem correct. When I click on the polyline (or any of them) they are on the correct layer and also by color layer and in the properties box - everything seems to be correct. I can draw new lines and they are the correct color - UNTIL I close and reopen the dwg and all polylines change to gray - BUT only visually - the layers still have the correct color and they will not even plot in color. Can anyone give my a suggestion as to what changed or do I just start this project over - ugghhh!!!
Model tab or a layout tab? Look in the page setup (plot dialog) and see if
Display plot styles is checked.
--
Murph
http://map3d.wordpress.com/
"CMGBrenda" wrote in message news:6347892@discussion.autodesk.com...
I believe I have a settings issue for which I am stumped- My polylines are
visually appearing grey when I open just this one particular dwg. I have
rechecked my layers and plot settings and all seem correct. When I click on
the polyline (or any of them) they are on the correct layer and also by
color layer and in the properties box - everything seems to be correct. I
can draw new lines and they are the correct color - UNTIL I close and reopen
the dwg and all polylines change to gray - BUT only visually - the layers
still have the correct color and they will not even plot in color. Can
anyone give my a suggestion as to what changed or do I just start this
project over - ugghhh!!!
I was working in model space - so what I did was go into my layout tab and the lines changed back to cyan - went back to model space and the lines stayed cyan. I then closed the dwg and reopened it again. As I was reopening the dwg - the lines were cyan but as soon as it finished opening - the lines changed to gray - I kid you not!! repeated the steps above - went to my layout tabs - lines changed to cyan -etc. I sure am stumped. I have checked the Display plot styles in the page setup and it appears as if nothing has changed and all is correct.
Are there any dwg objects layers in the Display Manager?
Murph
http://map3d.wordpress.com/
"CMGBrenda" wrote in message news:6347933@discussion.autodesk.com...
I was working in model space - so what I did was go into my layout tab and
the lines changed back to cyan - went back to model space and the lines
stayed cyan. I then closed the dwg and reopened it again. As I was
reopening the dwg - the lines were cyan but as soon as it finished opening -
the lines changed to gray - I kid you not!! repeated the steps above - went
to my layout tabs - lines changed to cyan -etc. I sure am stumped. I have
checked the Display plot styles in the page setup and it appears as if
nothing has changed and all is correct.
Had the same issue with polylines turning grey. Tried regen, audit and purge. Removed all features but nothing worked. Eventually started a new drawing with same coordinate system and performed a query "all" and the problem did not return. However, needed to use design center to re import layout settings. I thought the problem started when creating a legend from attached features.